Car Recall Check

Use the drop down menu's below to search by make or model to find the latest recalls.
You can also check other types of vehicles such as tractors, scooters, camper vans etc; car parts such as battery and tyres.

Find manufacturer recalls using our Car Recall Check, or simply browse the links below.
Vehicle Type:
Manufacturer:
Model
01/11/2013 - Mitsubishi
Lancer Evolution
No Image available
Check This Car for the following recall:
The product poses a risk of injuries due to insufficent strength of the (plastic) weld the clutch master cylinder may break, resulting in fluid leak.The clutch may become inoperative, either to shift gear or to start the car once the engine has been switched off.
Model Numbers:
Model Lancer Evolution (CZ4A)
Production Dates:
Not applicable
Recall Code:
For more information and see the full recall View
19/07/2013 - Mitsubishi
Outlander
No Image available
Check This Car for the following recall:
The power voltage monitoring circuit of the electric power steering system may operate incorrectly, resulting in a failure of the electric power assistance function.
Model Numbers:
GF0W
Production Dates:
Model year: 2013; production period until 28th March 2013.
Recall Code:
For more information and see the full recall View
19/07/2013 - Mitsubishi
ASX
No Image available
Check This Car for the following recall:
During the roof glass installation at the factory, the primer may not have been applied properly on the roof glass leading to insufficient chemical bonding between the primer and the glue in specific areas. The consequent insufficient adhesion force between the glass roof panel and the steel body could, in the worst case, result in the roof glass panel detaching from the steel roof panel.Two cases have been reported in Europe.
Model Numbers:
GA1W, GA2W, GA6W
Production Dates:
Model year: 2011; production period until 27th March 2011.
Recall Code:
For more information and see the full recall View
19/07/2013 - Mitsubishi
Outlander
No Image available
Check This Car for the following recall:
Due to improper programming of the engine control unit, the forward collision mitigation system may improperly judge the walls in a tunnel to be another vehicle. As a result, the system may automatically operate the brakes to reduce the vehicle speed.
Model Numbers:
GF6W
Production Dates:
Model year: 2013. Production period: until 20 May 2013.
Recall Code:
For more information and see the full recall View
10/05/2013 - Mitsubishi
L200
No Image available
Check This Car for the following recall:
The product poses a risk of injuries due to low engine power performance, poor idling, "MIL on" and engine stalling. Due to DPF (Diesel Particulate Filter) clogging, engine stalling may occur.
Model Numbers:
L200 (KA4T/KB4T); MY: 2012 - 2013.
Production Dates:
Recall Code:
For more information and see the full recall View
15/03/2013 - Mitsubishi
i-MiEV
No Image available
Check This Car for the following recall:
The electric brake vacuum pump might stop working. If this should happen, the vacuum to assist the brake booster would not be available and increased pedal force may be necessary to brake the vehicle. Consequently this could lead to an increased stopping distance.
Model Numbers:
i-MiEV (HA3W); Model Year: 2012-2013.Production period: 28-07-2011 to 3-11-2011 and 1-12-2011 to 11-10-2012.
Production Dates:
Recall Code:
For more information and see the full recall View
15/03/2013 - Mitsubishi
i-MiEV
No Image available
Check This Car for the following recall:
The electric brake vacuum pump might stop working. If this should happen, the vacuum to assist the brake booster would not be available and increased pedal force may be necessary to brake the vehicle. Consequently this could lead to an increased stopping distance.
Model Numbers:
i-MiEV (HA3W); Model Year: 2012-2013.Production period: 28-07-2011 to 3-11-2011 and 1-12-2011 to 11-10-2012.
Production Dates:
Recall Code:
For more information and see the full recall View
29/06/2012 - Mitsubishi
No Image available
Check This Car for the following recall:
There is a possibility that the parking brake cable might not have been properly hooked inside the brake shoe lever during vehicle assembly. As a result, there is a risk that the cable can suddenly become loose during transport/use of the car, leading to loss of parking (emergency) brake function.
Model Numbers:
Type: CWB, model:, EC type approval: e1*2001/116*0482. The vehicles concerned by the recall were built in 2011.
Production Dates:
Recall Code:
For more information and see the full recall View
24/02/2012 - Mitsubishi
No Image available
Check This Car for the following recall:
The pulley may detach from the alternator and drop into the engine compartment or on to the road. This could lead to the risk of an accident.
Model Numbers:
Type: CX9A, CY9A equipped with 4N13 DI-D engine. EC type approval e1*2001/116*0441*,The vehicles in question were manufactured in 2011.
Production Dates:
Recall Code:
For more information and see the full recall View
12/08/2011 - Mitsubishi
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the fixing screws on the back axis of the wheel hub (4 per side, total: 8) may not be sufficiently tightened in some vehicles and could gradually come loose over an extended period of time. In the worst-case scenario, the complete back axis of the wheel hub could come loose (the screws could fall off) leading to the risk of an accident.
Model Numbers:
The vehicles affected were manufactured between 2010 and 2011. EC type approval: e1_2001-116_0482_*, Type: CWB
Production Dates:
Recall Code:
For more information and see the full recall View
12/08/2011 - Mitsubishi
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the fixing screws on the back axis of the wheel hub (4 per side, total: 8) may not be sufficiently tightened in some vehicles and could gradually come loose over an extended period of time. In the worst-case scenario, the complete back axis of the wheel hub could come loose (the screws could fall off) leading to the risk of an accident.
Model Numbers:
The vehicles affected were manufactured between 2010 and 2011. EC type approval: e1_2001-116_0482_*, Type: CWB
Production Dates:
Recall Code:
For more information and see the full recall View
12/08/2011 - Mitsubishi
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the fixing screws on the back axis of the wheel hub (4 per side, total: 8) may not be sufficiently tightened in some vehicles and could gradually come loose over an extended period of time. In the worst-case scenario, the complete back axis of the wheel hub could come loose (the screws could fall off) leading to the risk of an accident.
Model Numbers:
The vehicles affected were manufactured between 2010 and 2011. EC type approval: e1_2001-116_0482_*, Type: CWB
Production Dates:
Recall Code:
For more information and see the full recall View
IP: 18.188.103.74