Car Recall Check

The product poses a risk of fire because of inadequate material of the fuel pump seal, the ozone-induced crack may develop on the fuel pump seal. In an extreme case, the fuel pump seal may lose its sealing ability, resulting in fuel leakage from the fuel tank.

The rear suspension on the motorcycles may collapse during riding due to the suspension arm breakage at its bearing mount area. The affected area is constantly under stress from the press-fitted bearing. When the affected area is exposed to corrosive agents such as snow melting agent, the affected area develop cracks to the point of breaking the bearing area.

The rear suspension on the motorcycles may collapse during riding due to the suspension arm breakage at its bearing mount area. The affected area is constantly under stress from the press-fitted bearing. When the affected area is exposed to corrosive agents such as snow melting agent, the affected area develop cracks to the point of breaking the bearing area.

The rear suspension on the motorcycles may collapse during riding due to the suspension arm breakage at its bearing mount area. The affected area is constantly under stress from the press-fitted bearing. When the affected area is exposed to corrosive agents such as snow melting agent, the affected area develop cracks to the point of breaking the bearing area.

The rear suspension on the motorcycles may collapse during riding due to the suspension arm breakage at its bearing mount area. The affected area is constantly under stress from the press-fitted bearing. When the affected area is exposed to corrosive agents such as snow melting agent, the affected area develop cracks to the point of breaking the bearing area.

This product poses a risk of injuries because vibration can cause the pulse generator coil cable to work loose. As a result, the engine stalls and cannot be restarted. The engine can stall even when driving which poses the risk of an accident.

This product poses a risk of injuries because vibration can cause the pulse generator coil cable to work loose. As a result, the engine stalls and cannot be restarted. The engine can stall even when driving which poses the risk of an accident.

This product poses a risk of injuries because vibration can cause the pulse generator coil cable to work loose. As a result, the engine stalls and cannot be restarted. The engine can stall even when driving which poses the risk of an accident.

This product poses a risk of injuries because vibration can cause the pulse generator coil cable to work loose. As a result, the engine stalls and cannot be restarted. The engine can stall even when driving which poses the risk of an accident.

In affected motorcycles, high-pressure washing or long usage in rainy conditions can cause water infiltration inside the main wiring harness’ protection. This water could remain for a long time inside the wiring harness area, which is U-shaped and trickle down into the TPS wire through a joint. This could cause a corrosion problem, especially inside the TPS coupler. As a consequence, the TPS signal could be disturbed causing incorrect ignition advance and injection timing to occur, with one or more of the following symptoms: - engine difficult to start; - bad engine response; or - muffler overheating that may cause certain plastic parts to melt and/or muffler damage. These symptoms (especially the second one) could lead to loss of control of the motorcycle.Moreover, this product poses a serious risk of injuries because breakage of the side stand bracket may occur when the product is placed on its stand and the stand is then used as a pivot and during transport. No breakages have occurred whilst the product has been ridden. The breakage is caused by stress concentration due to bracket shape and its fixing structure. Breakage of the side stand bracket could cause side-fall of the motorcycle, resulting in possible injury of the rider. During transportation on a trailer/van/truck, an accident is possible due to instability of the machine after breakage.

The affected motorcycles pose a risk of injury following a loss of control of the motorcycle. The risk results from the fact that the air filter mounting screws may come off and get caught at the throttle valve. If this happens, the throttle valve may stick and the vehicle does not reduce the engine speed properly.

These vehicles can exhibit various defects: - the fourth-gear sprocket on the gearbox main shaft can shift axially, since the circlip may slip out of the groove, - a dog on the fourth-gear sprocket on the layshaft may break off in the event of a violent gear-change. The main shaft including the fourth-gear sprocket and the associated clips and washers must be replaced on all vehicles. The fourth-gear sprocket on the layshaft must also be replaced with a modified, reinforced version.