Car Recall Check

A sudden increase of effort may be felt when steering the vehicle due to an excessive friction force of worm gear incorporated in the steering gear assembly. Sudden and unexpected change of steering effort while driving may increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The engine may fail to start while driving or at a stop, due to inappropriate failure detection logic of the Powertrain Control Module (PCM). Moreover, if the engine is restarted (“push button start” is pressed) in a short period (approx. 8 seconds) after IG OFF, the relay circuit of Mild Hybrid battery may not be connected due to inappropriate start-up instructions from PCM. The fail-safe may activate, making the shift position secured in “N” range, and the vehicle may result in“impossible to drive” condition.In addition, the images of the front-, side-, and rear-view cameras may no longer appear on the centre display monitor due to improper processing logic in the view monitor camera control module.Loss of camera images when in reverse and/or using the 360° monitor can increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Improper logic of the failsafe mode may cause the engine and electric motor to shutdown. This could cause loss of drive power, increasing the risk of an accident.Moreover, the images of the front-, side-, and rear-view cameras may no longer appear on the centre display monitor due to improper processing logic in the view monitor camera control module.Loss of camera images when in reverse and/or using the 360° monitor can increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Due to inappropriate material, the sealing gasket attached to the wiring connector of the LED running and position lights can release sulfur, corroding the circuit that is controlling the LED lights. As a result, the circuit may lose continuity causing the lights to flicker or fail to illuminate, increasing the risk of an accident.

The brake caliper mounting bolts may be loose or missing.This may cause reduced braking performance and caliper interference with wheel rotation, resulting in loss of control over the vehicle and increased risk of an incident.

Due to an improper manufacturing process of the fuel tank, when fully refueling the vehicle, liquid fuel will eventually fill the charcoal canister resulting in a leak. A leak from the canister in the presence of an ignition source may increase the risk of fire. Additionally, the engine may stall while driving, increasing the risk of an accident.

The optical axis of the Adaptive LED Headlight (ALH) may be adjusted too high while it is initialized in the center position. As a result, the oncoming traffic is blinded by the glare of the headlamp, increasing the risk of an accident.

The retaining force of the power liftgate drive motor may be insufficient and the support may be reduced especially at high ambient temperatures.As a result, the power liftgate could unexpectedly lower while a person is accessing the rear storage area of the vehicle, increasing the risk of an accident.

The wheel rims may be incorrectly assembled, which can lead to a wheel loss, creating a risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.