Car Recall Check

The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The propellant in the driver airbag may deteriorate over time. If the airbags deploy, it could result in fragments from the inflator injuring the vehicle's occupants. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

In the event of deployment of the passenger airbag, the casing of the gas generator could be damaged. Metal parts may become detached from the casing and cause injury to the occupants of the vehicle.

The earth connection for the control unit for the ABS/ESP system may be interrupted due to a thermo-mechanical overload. If this happens, the ABS/ESP system will fail leading to the risk of an accident.

Due to the incorrect assembly of the heat shield, the brake fluid reservoir nozzle can be melted by the exhaust system heat. This can result in brake fluid leakage, creating a risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Improper heat treatment applied to engine mounts may cause them to break. This affects the stability of driving, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The driver airbags may not inflate fast enough in the event of activation. As a result, sufficient protection is not guaranteed in the event of an accident, increasing the risk of an injury.

A lock nut in the automated transmission may loosen. As a result, the transmission may be damaged, increasing the risk of an accident.

The screws on the camshaft adjuster may become loose. As a result, engine oil will leak onto the road, posing a risk to the following traffic.

Due to an inadequate sensitivity in the LED turn signal operating control, a failure of the LED turn signals is not always detected. As a result, the mandatory warning (acoustic/optical) does not occur in these cases and the driver will not be notified of possible failure of the direction indicators, increasing the risk of an accident.

Due to a manufacturing error, seat belt anchorage points for the front seats may be inadequate.This will impair the seat belts' protective effect in the event of a collision or sudden braking, increase the risk of injury. The product does not meet the requirements set out in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction noise may occur in the area of the rear axle during operation, which may be followed by loss of control of the vehicle when the stub axle housing comes loose, increasing the risk of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.