Car Recall Check

The tyres are affected by a manufacturing variation. If a person accelerating on a motorbike with the defective tyre the person will loses balance and may fall. The product does not comply with the requirements of General Product Safety Directive.

During the process of assembling , it is possible that the manifold attachment parts were not tightened with the required torque. As a consequence, fixing elements on the exhaust manifold may become detached and fall onto the road increasing the risk of accidents. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Due to a manufacturing error, the motorcycle may have insufficient sealant performance due to small overlap allowance with the filler neck in the cooling system of the engine. If the vehicle is used continuously in this condition, high temperature coolant may leak from the overflow tube, which could cause an accident. The product does not comply with the requirements laid down in theRegulation on the approval and market surveillance of two- or threewheelvehicles and quadricycles.

Due to a manufacturing error, the motorcycle may have insufficient sealant performance due to small overlap allowance with the filler neck in the cooling system of the engine. If the vehicle is used continuously in this condition, high temperature coolant may leak from the overflow tube, which could cause an accident. The product does not comply with the requirements laid down in theRegulation on the approval and market surveillance of two- or threewheelvehicles and quadricycles.

Due to a manufacturing error, the motorcycle may have insufficient sealant performance due to small overlap allowance with the filler neck in the cooling system of the engine. If the vehicle is used continuously in this condition, high temperature coolant may leak from the overflow tube, which could cause an accident. The product does not comply with the requirements laid down in theRegulation on the approval and market surveillance of two- or threewheelvehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.

Some Motorcycles were considerate affected by technical campaign 0011460000, requiring replacement of the cylinder head. The spare parts kit provided for the campaign was pre-assembled. Due to an insufficient repair instruction for workshops of the BMW Motorrad dealer network, it is possible that the three threaded caps for the rocker arm axes will not be tightened with the required torque. In the event of insufficient tightening, oil could leak at the fixing points, increasing the risk of an accident. The product does not meet the requirements laid down in the Regulation on the type-approval and market surveillance of two- or three-wheel vehicles and quadricycles.