Car Recall Check: Recalls , Passenger Car, PORSCHE

PORSCHE Recalls
PORSCHE Recall Check

Checking PORSCHE Recall Notices When Buying a Used PORSCHE Car

Purchasing a used PORSCHE car can be a savvy financial decision, but it also comes with its own set of challenges and risks. One critical aspect that can often be overlooked is checking for any outstanding recall notices on the vehicle. Recalls are issued by PORSCHE to address safety issues that could potentially lead to accidents, injuries, or even fatalities. Hence, ignoring them could be perilous. In this article, we discuss why it's important to check for recall notices and how you can go about doing it.

View/Hide Article
Thinking of buying a used PORSCHE? Make sure you do a FREE used car check
Upgrade to one of our comprehensive checks (from £2.49) and use this coupon to get a 10% discount RECALL10.

We have PORSCHE recalls for the models below.

09/03/2012 - Porsche
No Image available
Check This Car for the following recall:
If a headlight module is not locked correctly, relative movements with respect to the wing will occur whilst driving and can cause the headlight to become detached from the wing which could lead to a road accident.
Model Numbers:
Cayenne (92A), Cayenne Diesel (92A), Cayenne S Hybrid (92A), Cayenne S (92A), Cayenne Turbo (92A).The recall concerns cars built between 08 March 2010 and 31 January 2012.
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
21/10/2011 - Porsche
No Image available
Check This Car for the following recall:
The diameter of the hole in the seatbelt end mount is too small. It is not possible to fully slide the mount onto the collar of the fastening screw. When the fastening screw is tightened, the belt end mount is pressed firmly against the vehicle body and cannot be rotated. This causes the reduced effectiveness of the restraint system in the event of a crash, increasing the seriousness of the injuries.
Model Numbers:
Concerns vehicles built between 31.05.2011 and 10.06.2011:·         Vehicle type 987, EG-type approval e13*2001/116*0141*12 and 13.·         Vehicle type 997, EG-type approval e13.....
Production Dates:
Recall Code:
For more information and see the full recall View
26/08/2011 - Porsche
No Image available
Check This Car for the following recall:
The products pose a risk of injuries because on vehicles with centre locking (racing style) wheels, the nuts holding the wheel onto the axle could work loose, releasing the wheel.
Model Numbers:
Vehicles manufactured since 2010 with options 422 and 430 (centre locking wheels).
Production Dates:
Recall Code:
For more information and see the full recall View
26/08/2011 - Porsche
No Image available
Check This Car for the following recall:
The products pose a risk of injuries because on vehicles with centre locking (racing style) wheels, the nuts holding the wheel onto the axle could work loose, releasing the wheel.
Model Numbers:
Vehicles manufactured since 2010 with options 422 and 430 (centre locking wheels).
Production Dates:
Recall Code:
For more information and see the full recall View
26/08/2011 - Porsche
No Image available
Check This Car for the following recall:
The products pose a risk of injuries because on vehicles with centre locking (racing style) wheels, the nuts holding the wheel onto the axle could work loose, releasing the wheel.
Model Numbers:
Vehicles manufactured since 2010 with options 422 and 430 (centre locking wheels).
Production Dates:
Recall Code:
For more information and see the full recall View
IP: 216.73.216.164