BMW X1 UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2024/119 (8202)

Manufacturer Reference

BMW - 0034670200

Defect

On affected vehicles an unexpected loss of hydraulic brake assistance may occur and may result in a different pedal behaviour under specific conditions an extended braking distance may be experienced and ABS/Stability control may be impaired

Remedy

On the affected vehicles the Integrated Brake System will be replaced

---

Recalls Number (Vehicles Effected)

R/2023/172 (4923)

Manufacturer Reference

BMW - 0011020700

Defect

"On some diesel vehicles glycol leakage from the EGR-Cooler may occur. In very rare cases this could lead to the melting of the Intake manifold and in very rare cases result in a possible fire. "

Remedy

Initial warning letter with advice to be sent with follow up Letter to call in vehicles for rectification work to be carried out on the affected vehicles once parts are available. The EGR cooler will be replaced with an optimised component.

---

Recalls Number (Vehicles Effected)

R/2023/127 (1963)

Manufacturer Reference

0072490200

Defect

In rare cases the lower section of the outer seat belts may have been trapped behind the lower part of the C-pillar interior trim panels.

Remedy

Check the fitment of the rear seat belts and if applicable release any trapped components.

---

Recalls Number (Vehicles Effected)

R/2022/340 (77)

Manufacturer Reference

BMW - 0054610100

Defect

One or both of the front panoramic sunroof drain tubes may be cracked this could result in water entering the interior of the vehicle. The wiring harness and body control unit (BCP) can be exposed to water and damaged. If water enters the BCP control unit the electrical function could be impaired.

Remedy

On the affected vehicles both front drain tubes will be checked and if required the tubes repaired.

---

Recalls Number (Vehicles Effected)

R/2022/280 (1)

Manufacturer Reference

0013810300

Defect

The high-pressure fuel rail may not have been produced according to specifications.

Remedy

Replace the high-pressure fuel rail.

---

Recalls Number (Vehicles Effected)

R/2022/255 (322745)

Manufacturer Reference

0013440300

Defect

Undetected EGR System leaks may cause thermal activity in the intake manifold.

Remedy

The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.

---

Recalls Number (Vehicles Effected)

R/2022/206 (319399)

Manufacturer Reference

"0011280600/0011420600"

Defect

The Exhaust Gas Recirculation cooler may leak over time and cause thermal incident.

Remedy

On the affected vehicles the EGR cooler module will be replaced.

---

Recalls Number (Vehicles Effected)

R/2022/089 (2018)

Manufacturer Reference

0072430200 0072450200

Defect

The micro gas generator within the front seatbelt?s retractor may have been damaged and may not act according to the specification in the event of an accident.

Remedy

On the affected vehicles the front seatbelts will be checked and replaced if they are found to have been damaged

---

Recalls Number (Vehicles Effected)

R/2021/442 (38)

Manufacturer Reference

0072370200 ? BMW

Defect

The material quality of seat and seatbelt screws may not be according to specification.

Remedy

On the affected vehicles the screws will be replaced in specific locations on the seat belts or rear seats.

---

Recalls Number (Vehicles Effected)

R/2020/283 (2665)

Manufacturer Reference

0061670500 0061660500

Defect

A possibility of impurities contained in the HV batteries may cause short circuit.

Remedy

Testing of battery charge cycles and replacement of the HV cells where necessary.

---

Recalls Number (Vehicles Effected)

R/2020/298 (871)

Manufacturer Reference

0061540500 0061560500

Defect

In very rare cases welding beads were not always completely removed in the cleaning process during battery production.

Remedy

Test and replace the High Voltage batteries if affected.

---

Recalls Number (Vehicles Effected)

R/2020/179 (71128)

Manufacturer Reference

0011720500 0011740500

Defect

The Exhaust Gas Recirculation (EGR) Module cooler could leak over time

Remedy

The EGR cooler will be inspected on the affected vehicles and replaced if evidence of leaking is found.

---

Recalls Number (Vehicles Effected)

R/2020/162 (189)

Manufacturer Reference

00653503006536030065370300

Defect

The air bag control unit may have been equipped with a defective sensor for the rollover detection.

Remedy

The Airbag control unit (ACSM4i) will be replaced on the affected vehicles.

---

Recalls Number (Vehicles Effected)

R/2019/288 (19)

Manufacturer Reference

0032890200 0032900200

Defect

The steering gear tie rod may not have been assembled with a required spherical washer

Remedy

Both steering gear tie rods will be checked and if affected tie rod/s and accompanying swivel bearing/s will be replaced

---

Recalls Number (Vehicles Effected)

R/2019/071 (3722)

Manufacturer Reference

0063570100

Defect

The rear lights of affected vehicles might be fixed with securing nuts which may not have been produced to supplier specifications.

Remedy

The rear lights will be checked and if necessary replaced.

---

Recalls Number (Vehicles Effected)

R/2018/341 (225449)

Manufacturer Reference

0011970400 0011420500

Defect

The EGR cooler may leakpresenting a fire risk

Remedy

A visual inspection of the EGR cooler to check for leaks and excessive build-up of deposits. The EGR cooler will be replaced on all affected vehicles

---

Recalls Number (Vehicles Effected)

R/2018/211 (4025)

Manufacturer Reference

"0013850200 0013860200"

Defect

The affected vehicles may be equipped with a crankshaft sensor with a software fault. The crankshaft sensor cannot process the signal values from the crankshaft transmitter due to an improper firmware level. The firmware does not compensate sufficiently the temperature gradients and the magnetic field strength of the sensor electronic. If the crankshaft sensor cannot process the signal values from the transmitter the Digital Diesel Electronic (DDE) will notice that and change to the emergency operation mode. The emergency mode will be displayed by the check control message ?engine malfunction?. The driver may notice a rough running engine and a reduced driving power (70%). However an engine stalling during driving conditions cannot be excluded.

Remedy

On the affected vehicles the crankshaft sensor will be replaced with a new version.

---

Recalls Number (Vehicles Effected)

R/2018/171 (100)

Manufacturer Reference

0031850100 0031860100

Defect

"Due to a fault in the supplier production process the swivel bearings on the front axle of the affected vehicles may not have been produced to specification. Due to an insufficient heat treatment the fracture strain has been reduced. The affected swivel bearings could break causing loss of wheel guidance during driving. "

Remedy

On the affected vehicles both swivel bearings will be checked and if necessary replaced with a part produced to specification.

---

Recalls Number (Vehicles Effected)

R/2018/132 (311848)

Manufacturer Reference

0061770400

Defect

The positive battery cable to the front distribution box behind the glove box can become damaged by vibrations and frictional corrosion. This may cause a loss of electrical connection to the distributions box. Symptoms include being unable to gain entry or start the car but the most common are a flickering instrument panel or uneven engine performance. However if the electrical connection is completely lost this will also affect the operation of the vehicles lighting systems; e.g. sidelights or hazard warning lamps.

Remedy

On affected vehicles carry out a suitable repair to the battery cable positive cable.

---

Recalls Number (Vehicles Effected)

R/2017/171 (7948)

Manufacturer Reference

0051150400

Defect

It is possible a recess on the inside of the instrument panel was not machined correctly. The recess is the predetermined break point of the instrument panel when the front passenger airbag is activated. If the milling has not been carried out correctly the proper deployment of the front passenger airbag cannot be ensured.

Remedy

Recall the vehicles that are likely to be affected and check the milling of the predetermined break point. Where necessary the instrument panel will be replaced.

---

Recalls Number (Vehicles Effected)

R/2017/132 (10849)

Manufacturer Reference

0026330100

Defect

Due to insufficient strength the front universal joint in the rear front universal joint of the rear prop shaft may fail.

Remedy

On affected vehicle replace the universal joint with a modified version

---

Recalls Number (Vehicles Effected)

R/2017/114 (36410)

Manufacturer Reference

0061390400/0061400400

Defect

It is possible that the connection between the B+ cable and the Power Distribution Box can become damaged by wear and heat which is caused by high current flow and high contact resistance. Normally this will result in a non-start situation after parking the vehicle. However it is possible that this could in extreme cases occur whilst the vehicle is in motion. The driver should be made aware of the issue by flickering of the instrument cluster (dash) or an engine mis-fire; but if the driver does not then the engine could cut-out without warning.

Remedy

Recall all affected vehicles with petrol engines and replace the cable/connection with a more robust item.

---

Recalls Number (Vehicles Effected)

R/2017/052 (2)

Manufacturer Reference

0051110400

Defect

A recess on the inside of the fascia panel may not have been correctly machined . This recess affects the deployment of the front passenger's air bag and it may not deploy as intended.

Remedy

On affected vehicles replace fascia panel.

---

Recalls Number (Vehicles Effected)

R/2017/011 (668)

Manufacturer Reference

0072760100

Defect

The igniter for the certain airbag modules may not have been correctly manufactured which may affect air bag deployment in the event of a collision.

Remedy

Where necessary replace affected airbag modules.

---

Recalls Number (Vehicles Effected)

R/2014/068 (2967)

Manufacturer Reference

0011280300& 0011360300

Defect

The screws retaining the variable camshaft timing (VANOS) housing may loosen and under certain circumstances the heads may break off. This can lead to the VANOS leaking oil internally and adversely affect the valve timing adjustment. If found to deviating from targeted data the engine emergency mode will be activated. This will be indicated by a distinct change in engine running. The orange engine management warning lamp and a check message; On vehicles with N51/N52 engines this will appear at ignition recycle on N55 engine it will display immediately.

Remedy

Repalce bolted connection of the VANOS adjustment unit

---

Recalls Number (Vehicles Effected)

R/2013/080 (4)

Manufacturer Reference

0021130100

Defect

It is possible that over a period of time the bolt securing the clutch cover/pressure plate may become loose. The drive should be warned of this by the behaviour of the clutch noise from it or inability to select gears. Under certain conditions complete loss of drive could occur which could place the driver and occupant of the vehicle in a prone position.

Remedy

Recall all affected vehicles and replace the clutch bolts.

---

Recalls Number (Vehicles Effected)

R/2013/024 (36)

Manufacturer Reference

0061760300

Defect

It is possible that the connection between the B+ cable and the Power Distribution Box can become damaged by wear and heat which is caused by high current flow and high contact resistance. Normally this will result in a non-start situation after parking the vehicle. However it is possible that this could in extreme cases occur whilst the vehicle is in motion. The driver should be make aware of the issue by flickering of the instrument cluster (dash) or an engine mis-fire; but if the driver does not then the engine could cut-out without warning.

Remedy

Recall all affected vehicles and replace the cable/connection with a more robust item.

---

Recalls Number (Vehicles Effected)

R/2012/081 (701)

Manufacturer Reference

0032090200

Defect

Due to a component in the integrated control module not being to specification it is possible power steering assistance may fail. If this happens the EPS warning lamp will illuminate and a check control message will appear on the dashboard display. Directional control will be maintained albeit with additional driver input.

Remedy

Recall vehicles likely to be affected to replace the steering box.