BMW X5 UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2024/119 (1833)

Manufacturer Reference

BMW - 0034670200

Defect

On affected vehicles an unexpected loss of hydraulic brake assistance may occur and may result in a different pedal behaviour under specific conditions an extended braking distance may be experienced and ABS/Stability control may be impaired

Remedy

On the affected vehicles the Integrated Brake System will be replaced

---

Recalls Number (Vehicles Effected)

R/2023/354 (26)

Manufacturer Reference

0024730100

Defect

On affected vehicles ingress of transmission fluid may occur to the integrated transmission control unit within the mechatronic module

Remedy

On affected vehicles the transmission mechatronic module will be replaced

---

Recalls Number (Vehicles Effected)

R/2024/156 (197)

Manufacturer Reference

0099410200

Defect

On affected vehicles risk of potential flooding could have occurred leading to salt water ingress whilst parked in port awaiting shipping

Remedy

The affected vehicles will be thoroughly checked cleaned and reworked as required

---

Recalls Number (Vehicles Effected)

R/2023/224 (44407)

Manufacturer Reference

0032430300 0072500200

Defect

The driver and front passenger airbags may deploy with too much explosive force causing sharp metal fragments to be released into the cabin.

Remedy

Replace the driver and front passenger airbags.

---

Recalls Number (Vehicles Effected)

R/2023/016 (187293)

Manufacturer Reference

0032390300 0032420300

Defect

A possible degradation of airbag propellant tablets could lead to an over-aggressive combustion in the event the airbag is activated which may cause the inflator body to rupture.

Remedy

On affected vehicles the driver?s airbag module will be replaced.

---

Recalls Number (Vehicles Effected)

R/2022/255 (322745)

Manufacturer Reference

0013440300

Defect

Undetected EGR System leaks may cause thermal activity in the intake manifold.

Remedy

The engine management control unit (DDE) will be programmed with improved software incorporating the latest OBD functionality.

---

Recalls Number (Vehicles Effected)

R/2022/206 (319399)

Manufacturer Reference

"0011280600/0011420600"

Defect

The Exhaust Gas Recirculation cooler may leak over time and cause thermal incident.

Remedy

On the affected vehicles the EGR cooler module will be replaced.

---

Recalls Number (Vehicles Effected)

R/2021/299 (1)

Manufacturer Reference

0051420100

Defect

The oil filter line may come into contact with the brake line.

Remedy

Install a modified rubber spacer and replace any brake lines showing signs of chafing.

---

Recalls Number (Vehicles Effected)

R/2021/307 (882)

Manufacturer Reference

0032380100

Defect

The steering column shaft assembly may detach from the bottom double joint.

Remedy

Check the bottom end of the steering shaft and if required resecure the shaft using a new screw.

---

Recalls Number (Vehicles Effected)

R/2021/267 (1963)

Manufacturer Reference

0035130100

Defect

It is possible that the brake pedal shaft could become detached from the pedal controls bearing mount.

Remedy

On affected vehicles the brake pedal bearing shaft must be secured in the pedal controls with a roll pin.

---

Recalls Number (Vehicles Effected)

R/2021/227 (8)

Manufacturer Reference

0072150100

Defect

The reinforcement ring (thimble) may not have been securely crimped onto the belt tensioner's steel cable.

Remedy

Check the belt buckle and if necessary conduct replacement of the lower strap including belt tensioner.

---

Recalls Number (Vehicles Effected)

R/2021/213 (18330)

Manufacturer Reference

0011130600

Defect

The Exhaust Gas Recirculation (EGR) Module could leak over time?and cause thermal incident.

Remedy

The EGR cooler will be internally inspected with an endoscope and replaced if evidence of leaking is found.

---

Recalls Number (Vehicles Effected)

R/2021/156 (35)

Manufacturer Reference

0052970100

Defect

Incorrect headrest rods may have been installed in the backrest of the second row of seats on the outer side.

Remedy

On affected vehicles the outer headrest of the second seat row will be checked and replaced if necessary.

---

Recalls Number (Vehicles Effected)

R/2021/054 (139)

Manufacturer Reference

0034550200

Defect

The Integrated Brake system hydraulic unit may have been produced incorrectly

Remedy

Replace the Integrated Brake system hydraulic unit.

---

Recalls Number (Vehicles Effected)

R/2021/067 (4)

Manufacturer Reference

00361802000036200200

Defect

Some 22? Continental tyres were produced out of specification.

Remedy

The tyres will be inspected for a specific DOT and mould number and will be replaced if found to be within the faulty range.

---

Recalls Number (Vehicles Effected)

R/2021/037 (63888)

Manufacturer Reference

0011880500 0011890500

Defect

Leaking glycol coolant could create in combination with soot and oil sediments in the EGR module ignitable deposits.

Remedy

The EGR cooler will be internally inspected with an endoscope and replaced if evidence of leaking is found.

---

Recalls Number (Vehicles Effected)

R/2021/015 (388)

Manufacturer Reference

0012490500 0012560500

Defect

The battery cables on the 48V starter generator may not have been sufficiently secured during the production process.

Remedy

Check the screw connection of the 48V positive / negative battery cables on the starter generator and rework if necessary.

---

Recalls Number (Vehicles Effected)

R/2020/283 (2665)

Manufacturer Reference

0061670500 0061660500

Defect

A possibility of impurities contained in the HV batteries may cause short circuit.

Remedy

Testing of battery charge cycles and replacement of the HV cells where necessary.

---

Recalls Number (Vehicles Effected)

R/2020/343 (97)

Manufacturer Reference

0061610500

Defect

To comply with the regulation an additional crash pad is required behind the auxiliary battery.

Remedy

On the affected vehicles the crash pad will be retrofitted.

---

Recalls Number (Vehicles Effected)

R/2021/072 (10)

Manufacturer Reference

0031020200

Defect

The front axle support (subframe) welding process has not been completed according to specifications.

Remedy

Replace the front axle support.

---

Recalls Number (Vehicles Effected)

R/2020/298 (871)

Manufacturer Reference

0061540500 0061560500

Defect

In very rare cases welding beads were not always completely removed in the cleaning process during battery production.

Remedy

Test and replace the High Voltage batteries if affected.

---

Recalls Number (Vehicles Effected)

R/2020/252 (11)

Manufacturer Reference

0012390500

Defect

A starter bolt may have been installed incorrectly and become lost inside the transmission bell housing.

Remedy

The starter motor will be removed and checked for a bolt that is adrift any damage found will be rectified.

---

Recalls Number (Vehicles Effected)

R/2020/234 (1)

Manufacturer Reference

0032160300

Defect

The steering shaft bearing plate may not have been screwed on correctly.

Remedy

On the affected vehicles the screw connection of the steering shaft bearing plate will be inspected and if necessary correctly attached or replaced.

---

Recalls Number (Vehicles Effected)

R/2019/366 (1)

Manufacturer Reference

0036090200

Defect

The wheel bolts (left side) that may not have been tightened to specifications

Remedy

On the affected vehicles all wheel bolts on the left side will be replaced and tightened to specifications.

---

Recalls Number (Vehicles Effected)

R/2019/192 (31601)

Manufacturer Reference

0061100500.0061890500

Defect

The blower regulator wiring could be damaged increasing the risk of fire.

Remedy

The connection of the blower-regulator will be checked and reworked and if necessary the blower regulator will be replaced.

---

Recalls Number (Vehicles Effected)

R/2019/091 (11)

Manufacturer Reference

0072030200

Defect

An incorrect tightening torque of the fixing bolts of the left front seat.

Remedy

Affected bolts will be checked and tightened with the correct torque; if necessary the bolt will be replaced.

---

Recalls Number (Vehicles Effected)

R/2019/086 (34206)

Manufacturer Reference

"00327902000032930200"

Defect

The front drivers air bag may not deploy correctly on activation.

Remedy

Check and replace the drivers front air bag if required.

---

Recalls Number (Vehicles Effected)

R/2019/057 (5866)

Manufacturer Reference

"0011150500 0011160500"

Defect

The auxiliary water pump may short circuit causing a thermal incident.

Remedy

The Auxiliary Water Pump of the affected vehicles will be replaced.

---

Recalls Number (Vehicles Effected)

R/2019/018 (21123)

Manufacturer Reference

0012680400

Defect

The power steering idler pulley may detach.

Remedy

Replace the pulley securing bolt with an alternative component.

---

Recalls Number (Vehicles Effected)

R/2018/341 (225449)

Manufacturer Reference

0011970400 0011420500

Defect

The EGR cooler may leakpresenting a fire risk

Remedy

A visual inspection of the EGR cooler to check for leaks and excessive build-up of deposits. The EGR cooler will be replaced on all affected vehicles

---

Recalls Number (Vehicles Effected)

R/2018/258 (153602)

Manufacturer Reference

"0011830400 0011900400"

Defect

The EGR cooler may leakpresenting a fire risk.

Remedy

The EGR cooler will be replaced with an improved version.

---

Recalls Number (Vehicles Effected)

R/2018/262 (19)

Manufacturer Reference

0036030200

Defect

Due to a fault at the vehicles assembly line some wheel bolts may not have been tightened to specification.

Remedy

On the affected vehicles the wheel bolts will be replaced.

---

Recalls Number (Vehicles Effected)

R/2017/001 (1)

Manufacturer Reference

0012390400

Defect

It has been identified that the bolt that connects the ground cable from the wiring harness of the Digital Motor Electronics (DME) to the engine block may not have been tightened/torqued to the correct specification. This can lead to an under voltage supply which can trigger a reset of the DME. This can result in the engine cutting out or depending on vehicle speed to restart/turn on the engine once the reset has been completed.

Remedy

Recall all affected vehicles to check and if required retorque the bolt for the ground cable on the engine block.

---

Recalls Number (Vehicles Effected)

R/2016/300 (41)

Manufacturer Reference

003245200

Defect

The electrical contact of the Electronic Control Unit (ECU) of the Electric Power Steering (EPS) is not sufficiently robust over the service life of the vehicle. As a result the power steering support may fail possibly leading to disconcerting driving situation for the driver. Additionally in a few cases a localised thermal event cannot be excluded.

Remedy

Recall the vehicles that are likely to be affected and replace the steering gear (EPS).

---

Recalls Number (Vehicles Effected)

R/2016/252 (218559)

Manufacturer Reference

0032260200

Defect

The driver's air bag inflator may rupture during deployment. Metal shards may pass through the air bag material and cause injury to occupants.

Remedy

On affected vehicles replace air bag and inflator assemblies.

---

Recalls Number (Vehicles Effected)

R/2014/177 (5)

Manufacturer Reference

0052590100

Defect

For the left hand rear comfort seat the bracket to which the seat belt buckle is mounted may not be correctly positioned. The incorrect positioning causes incorrect welding of the bracket to the seat frame. If a collision occurs the welding for the bracket may weaken / fail leading to increased risk for the passenger in that seat.

Remedy

Recall the vehicles that are likely to be affected and replace the seat frame for the left hand rear comfort seat.

---

Recalls Number (Vehicles Effected)

R/2014/068 (2967)

Manufacturer Reference

0011280300& 0011360300

Defect

The screws retaining the variable camshaft timing (VANOS) housing may loosen and under certain circumstances the heads may break off. This can lead to the VANOS leaking oil internally and adversely affect the valve timing adjustment. If found to deviating from targeted data the engine emergency mode will be activated. This will be indicated by a distinct change in engine running. The orange engine management warning lamp and a check message; On vehicles with N51/N52 engines this will appear at ignition recycle on N55 engine it will display immediately.

Remedy

Repalce bolted connection of the VANOS adjustment unit

---

Recalls Number (Vehicles Effected)

R/2014/054 (131)

Manufacturer Reference

0051370300

Defect

It is possible that vehicles fitted with Automatic Soft-Closure Feature (SCA) rear doors may have an issue with out of tolerance on the SCA mechanism which can result in the deactivation of the child locks when they are activated. This could result in a child unintentionally opening the door and exiting the vehicle. The driver is informed that the rear door is open by a warning on the instrument panel and an acoustic (noise) warning.

Remedy

Recall all affected vehicles to check the locks and replace them if required.

---

Recalls Number (Vehicles Effected)

R/2013/095 (21502)

Manufacturer Reference

001345200

Defect

Due to a fault with an internal connection within the Fuel Filter Heater (FFH) it is possible that during temperatures below freezing the FFH can remain permanently activated. This will normally cause the FFH to overheat which will result in the inability to start the vehicle due to a flat battery. This can occur even when the ignition is turned off. However in extreme cases it could cause a vehicle fire.

Remedy

Recall all affected vehicles to replace the FFH.

---

Recalls Number (Vehicles Effected)

R/2013/023 (759)

Manufacturer Reference

0034080200

Defect

Brake performance may be affected as a result of oil contamination of the brake servo. The servo membrane could over a period of time soften and fail causing lower levels of servo assistance for the brakes.

Remedy

Recall the vehicles that are likely to be affected to replace the vacuum hose and fit a non-return valve (oil stop) between the booster and servo. Where necessary the servo and master cylinder will be replaced.

---

Recalls Number (Vehicles Effected)

R/2012/150 (22737)

Manufacturer Reference

0012390300

Defect

The power steering pump drive belt tensioner pulley securing bolt may fail which will lead to the loss of power steering assistance and the necessity for the driver to supply additional input to steering the vehicle.

Remedy

Recall the vehicles that are likely to be affected to replace the steering pump drive belt tensioner pulley securing bolt with a more robust version.

---

Recalls Number (Vehicles Effected)

R/2012/078 (5)

Manufacturer Reference

0032080200

Defect

The power steering box housing may not be machined to the correct specification. This could cause an over pressurisation of bellows due to the insecurity of a snap ring and result in a sudden loss of hydraulic pressure. Oil will then be sprayed onto hot engine components and may ignite.

Remedy

Affected vehicles will be recalled to have the steering box replaced.

---

Recalls Number (Vehicles Effected)

R/2012/049 (21)

Manufacturer Reference

0011930200

Defect

Some engines are fitted with an additional water pump for the turbo charger. In some circumstances a crack may develop which then leads to melting of the plug connections and the housing. Further heat development may then lead to scorch damage. In exceptional cases such overheating can lead to smouldering of the water pump. If smouldering occurs an engine compartment fire and vehicle fire cannot be excluded.

Remedy

The water pump will be replaced for a new more robust version.

---

Recalls Number (Vehicles Effected)

R/2011/147 (557)

Manufacturer Reference

0011830200

Defect

Due to the ingress of moisture it is possible that a short circuit can occur in the additional coolant pump for the exhaust turbocharger. The driver will be informed of the issue by a warning message on the display in the instrument panel. If not addressed it is possible for further heat build up in the pump which may cause the plug connection and housing to melt and in extreme cases a localised fire in the engine compartment or vehicle.

Remedy

Recall all affected vehicles for the replacement of the additional coolant pump.

---

Recalls Number (Vehicles Effected)

R/2011/123 (21923)

Manufacturer Reference

0013080200

Defect

Moisture may enter the fuel filter heater at an electrical connection. Should this occur it can cause a discharge of the battery causing non starting of the vehicle. Also if it occurs whilst the vehicle is in motion it could result in a fire when the vehicle is left unattended.

Remedy

Recall all affected vehicles and replace the fuel filter heater.

---

Recalls Number (Vehicles Effected)

R/2010/197 (4)

Manufacturer Reference

0016670100

Defect

Due to a manufacturing defect which causes premature wear of the fuel pump commutator it is possible that the engine might cut out whilst driving.

Remedy

Recall the vehicles that are likely to be affected to replace the fuel pump.

---

Recalls Number (Vehicles Effected)

R/2009/074 (53)

Manufacturer Reference

0034720100

Defect

It has been identified that during the manufacturing process cracks may have formed in the area of the brake disc body. Subsequent surface treatment means that any such crack will not be detectable at a later date. Should a crack have formed this may cause the brake disc to fail whilst the vehicle is in motion causing the affected brake to become inoperative.

Remedy

Recalled vehicles will have the rear axle brake discs checked for the affected production date. The brake discs will be checked if necessary.

---

Recalls Number (Vehicles Effected)

R/2008/179 (6240)

Manufacturer Reference

0065120200

Defect

The front air bags may trigger unnecessarily and the possibility of occupant injury cannot be excluded.

Remedy

Recall the vehicles that are likely to be affected to recode the air bag control unit.

---

Recalls Number (Vehicles Effected)

R/2007/122 (1887)

Manufacturer Reference

Defect

If a brake fluid leak occurs the brake fluid low level warning may be given too late.

Remedy

Recall the vehicles that are likely to be affected to check the serial number of the brake servo and where necessary replace the cap for the expansion tank which includes the warning switch.

---

Recalls Number (Vehicles Effected)

R/2007/106 (1606)

Manufacturer Reference

Defect

It has been identified that in the event of a situation which requires activation of the driver's seat belt tensioner. The possibility exists that due to an unfavourable pulse within the seatbelt buckle tensioner mechanism the buckle may open inadvertently.

Remedy

Recalled vehicles will have the relevant electronic control units reprogrammed.

---

Recalls Number (Vehicles Effected)

R/2005/022 (697)

Manufacturer Reference

Defect

The bearings of the high pressure fuel injector pump may fail after a short travelled distance (approximately 3000 to 6000 miles) This leads to a total failure of the engine's fuel supply which results in the engine stalling.

Remedy

Recall likely to be affected vehicles and replace the fuel injector pump.

---

Recalls Number (Vehicles Effected)

R/2004/131 (231)

Manufacturer Reference

Defect

Due to a hardware fault within the digital engine electronic control unit the possibility exists that the unit could fail completely resulting in loss of engine power.

Remedy

Recall likely to be affected vehicles and replace the control unit with a quality assured item.

---

Recalls Number (Vehicles Effected)

R/2003/039 (445)

Manufacturer Reference

Defect

It is possible that the reinforcement ring in the front seat belt tensioner has not been securely crimped onto the belt tensioner's steel cable. This connection could give in the event of a severe collision and could work loose in extreme cases.

Remedy

Check the production date on both front seat belt tensioners and replace if they fall within the affected production period.

---

Recalls Number (Vehicles Effected)

R/2003/026 (9090)

Manufacturer Reference

Defect

The securing grommet for the front brake hose onto the suspension strut may become detached. In this situation it is possible that the hose could rub against the inside of the front tyre causing consequential damage to the hose. In extreme cases brake fluid could leak causing loss of braking action on the front axle.

Remedy

The repair will involve fitting a securing clip to the hose and grommet and checking the hose for damage.

---

Recalls Number (Vehicles Effected)

R/2002/106 (1971)

Manufacturer Reference

Defect

The brake pedal mounting shaft may have been incorrectly manufactured. In this situation the bush may become loose and in very extreme situations the brake pedal can become detached.

Remedy

Check the brake pedal shaft in the bearing mount and secure it with a new roll pin.