Date From | Date To | Concern |
---|
29/01/20 | | Raised: 01/12/22 - Some vehicles may have been equipped with an incorrectly positioned fuel pipe. View/hide..
Recalls Number (Vehicles Effected)R/2022/337 (1507)
Manufacturer ReferenceJJP
DefectSome vehicles may have been equipped with an incorrectly positioned fuel pipe.
RemedyCheck fuel pipe positioning correct if necessary and fit protective sleeve.
|
20/01/22 | | Raised: 08/08/22 - THE EFFICIENCY OF THE HANDBRAKE AND SERVICE BRAKE MAY BE COMPROMISED. View/hide..
Recalls Number (Vehicles Effected)R/2022/242 (27)
Manufacturer ReferenceJGJ
DefectOn the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised
RemedyCheck the rear brake caliper references and replace as necessary
|
28/03/22 | | Raised: 13/07/22 - THE HIGH VOLTAGE HARNESS FITTED MIGHT NOT BE TO CORRECT SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2022/202 (11)
Manufacturer ReferenceJFN
DefectThe High Voltage Harness might not be to the correct specification.
RemedyCheck the harness conformity and replace it if necessary.
|
16/11/21 | | Raised: 10/05/22 - HEADRESTS ON THE FRONT MODULAR SEAT DO NOT CONFORM TO THE DESIGN SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2022/126 (359)
Manufacturer ReferenceJAS
DefectAffected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification.
RemedyCheck the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced.
|
20/10/15 | | Raised: 31/01/22 - ELECTRICAL HARNESS COULD MOVE FROM ORIGINAL POSITION AND WEAKEN THE HARNESS View/hide..
Recalls Number (Vehicles Effected)R/2022/028 (1)
Manufacturer ReferenceHQB
DefectThe rear window electrical harness could become displaced from its original position and present a potential thermal issue.
RemedyCheck the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position.
|
24/09/20 | | Raised: 05/01/21 - VEHICLES AFFECTED MAY HAVE A SINGLE WHEEL BOLT ON BOTH RIGHT HAND SIDE WHEELS WHICH MAY NOT HAVE BEEN TIGHTENED CORRECTLY View/hide..
Recalls Number (Vehicles Effected)R/2021/006 (7)
Manufacturer ReferenceHLK
DefectA single wheel bolt on both Right-hand wheels may not be tightened to the correct tightening torque.
RemedyCheck and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.
|
24/09/20 | | Raised: 05/01/21 - VEHICLES AFFECTED MAY HAVE A SINGLE WHEEL BOLT ON BOTH LEFT HAND SIDE WHEELS WHICH MAY NOT HAVE BEEN TIGHTENED CORRECTLY View/hide..
Recalls Number (Vehicles Effected)R/2021/007 (12)
Manufacturer ReferenceHLJ
DefectA single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque.
RemedyCheck and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.
|
15/10/19 | | Raised: 05/02/20 - CERTAIN SEALS IN THE FRONT WHEEL ARCHES MAY NOT BE CORRECT TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/430 (15)
Manufacturer ReferenceHAB
DefectCertain seals in the front wheel arches may not be correct to specification and may cause water ingress into the passenger compartment
RemedyResealing these areas checking for the presence of water in the passenger compartment and replacing certain components in the interior if required.
|
16/04/15 | | Raised: 15/08/19 - IF THE FRONT CENTRE PASSENGER SEATING POSITION IS OCCUPIED THE FRONT OUTER PASSENGER SEAT BELT COULD RELEASE View/hide..
Recalls Number (Vehicles Effected)R/2019/257 (16122)
Manufacturer ReferenceGTJ
DefectThere is a risk of inadvertent release to the front outer passenger seat belt.
RemedyModifying the central seat buckle with foam and heat-shrinkable protective tubing.
|
21/09/15 | | Raised: 09/05/19 - FRONT SUSPENSION MAY NOT BE TO CORRECT SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/145 (11023)
Manufacturer ReferenceGNP
DefectPossible slackening of the front wishbone ball joint.
RemedyIncreasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.
|
16/04/15 | | Raised: 09/05/19 - FRONT SUSPENSION MAY NOT BE TO CORRECT SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/145 (11023)
Manufacturer ReferenceGNP
DefectPossible slackening of the front wishbone ball joint.
RemedyIncreasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced.
|
01/07/16 | | Raised: 01/02/19 - THE FIXING BOLT OF THE FRONT SUSPENSION WISHBONE MAY NOT BE CORRECT TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/033 (47)
Manufacturer ReferenceGNR
DefectThe fixing bolt of the front Suspension wishbone may not be correct to specification.
RemedyReplace the fixing bolts and nuts of the front suspension wishbones.
|
06/10/16 | | Raised: 01/02/19 - REAR SUSPENSION WISHBONE MOUNTING BOLTS NAY NOT BE CORRECT TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/031 (313)
Manufacturer ReferenceGPM
DefectThe rear suspension wishbone mountings bolts may not be correct to specification.
RemedyReplacement of the rear suspension wishbone bolts.
|
08/09/15 | | Raised: 01/02/19 - UNDER CERTAIN DRIVING CONDITIONS THE AIR CONDITIONING COMPRESSOR PULLEY COULD BREAK View/hide..
Recalls Number (Vehicles Effected)R/2019/029 (2310)
Manufacturer ReferenceGLD
DefectThe air conditioning compressor pulley could break and damage other components.
RemedyReplace the air conditioning compressor pulley and if necessary the protective cover.
|
25/10/16 | | Raised: 01/02/19 - THE STEERING RACK ASSEMBLY MAY NOT BE CORRECT TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/035 (10)
Manufacturer ReferenceGPK
DefectThe steering rack assembly may not be correct to specification.
RemedyReplace the steering rack assembly and the fixings.
|
01/01/15 | | Raised: 01/02/19 - EXCESSIVE LOADING OF THE FRONT SUSPENSION COULD RESULT IN THE LOOSENING OF THE FRONT WISHBONE LOWER BALL JOINTS View/hide..
Recalls Number (Vehicles Effected)R/2019/027 (2633)
Manufacturer ReferenceGQH
DefectExcessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.
Remedy"Increasing the tightening torque of the ball joint and adding thread lock to the ball jointthreads if the ball joint threads are found to be rusty the ball joint will be replaced."
|
13/11/15 | | Raised: 25/07/18 - Tow ball support bracket durability inadequate View/hide..
Recalls Number (Vehicles Effected)R/2018/195 (103)
Manufacturer ReferenceGFW
DefectThe tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.
RemedyThe manufacturer?s remedy involves the replacement of the tow ball support bracket with a redesigned version.
|
17/02/16 | | Raised: 24/07/18 - COOLING SYSTEM STRATEGY COULD OVERHEAT THE ENGINE. View/hide..
Recalls Number (Vehicles Effected)R/2018/193 (660)
Manufacturer ReferenceGKG
Defect"The cooling system strategy and the maximum temperature alert could cause the engineto overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert."
RemedyThe remedy involves downloading new engine management software.
|
30/04/18 | | Raised: 19/07/18 - Engine oil gallery sealing plug incorrectly tightened View/hide..
Recalls Number (Vehicles Effected)R/2018/187 (37)
Manufacturer ReferenceGLN
Defect"On the affected vehicles the tightening of a sealing plug on the engine oil gallery maynot be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road. "
RemedyThe remedy consists of tightening the engine oil gallery sealing plug to the correct torque.
|
01/10/17 | | Raised: 03/01/18 - ENGINE COMPONENT MAY NOT BE TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2018/002 (198)
Manufacturer ReferenceGFY
DefectAn engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.
RemedyOn affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.
|
13/01/16 | | Raised: 14/09/17 - STARTER MOTOR SUPPLY WIRING HARNESS MAY BECOME DAMAGED View/hide..
Recalls Number (Vehicles Effected)R/2017/262 (12)
Manufacturer ReferenceGDL
DefectThe positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.
RemedyOn affected vehicles check the positioning of the terminal and correct it if necessary.
|
15/06/16 | | Raised: 24/04/17 - STARTER MOTOR MAY NOT OPERATE CORRECTLY View/hide..
Recalls Number (Vehicles Effected)R/2017/139 (3607)
Manufacturer ReferenceNYD
DefectA possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.
RemedyOn affected vehicles check and where necessary replace the starter motor relay.
|
02/02/16 | | Raised: 22/02/17 - FUEL MAY LEAK View/hide..
Recalls Number (Vehicles Effected)R/2017/057 (54)
Manufacturer ReferenceNVF
Defect"On the affected vehicles a possible non-conformity in the positioning of the fuel filler neck sealnear the filler cap could cause a fuel leak when completely filling up the tank."
RemedyChecking and if necessary refit seal.
|
13/04/16 | | Raised: 22/02/17 - BRAKE SERVO MAY BE INSECURE View/hide..
Recalls Number (Vehicles Effected)R/2017/058 (2)
Manufacturer ReferenceNYJ
DefectThe tightening torque of one of the nuts of the connection between the brake servo unit and the brake pedal may be not correct to specification. This may allow air to enter the servo
RemedyCheck servo security and where necessary replace the brake servo unit
|
| | Raised: 22/02/17 - FRONT SHOCK ABSORBER MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2017/067 (1)
Manufacturer ReferenceNYF
DefectThe bolts retaining the front shock absorber could come loose. This may adversely affect the steering control of the vehicle.
RemedyOn affected vehicles replace the front shock absorber retaining bolts.
|