Date From | Date To | Concern |
---|
02/01/23 | | Raised: 28/06/23 - The front suspension lower ball joint bolt/nut may not be torqued correctly on a small number of Fiesta vehicles. View/hide..
Recalls Number (Vehicles Effected)R/2023/189 (186)
Manufacturer Reference23S29
DefectThe front suspension lower ball joint bolt/nut may not be torqued correctly on a small number of Fiesta vehicles.
RemedyAffected vehicles need to be returned to a Ford Authorised Dealer to have the torque confirmed.
|
13/11/20 | | Raised: 08/04/22 - THE RIGHT-HAND ENGINE OIL SEPERATOR MAY HAVE BEEN DAMAGED PRIOR TO ENGINE ASSEMBLY. View/hide..
Recalls Number (Vehicles Effected)R/2022/171 (9818)
Manufacturer Reference22S21
DefectCertain vehicles could have an engine oil separator that may have been damaged prior to engine assembly.
RemedyInspect the engine oil separator and if found to be damaged and/or leaking a replacement engine oil separator must be installed
|
20/04/21 | | Raised: 27/10/21 - THE WIRING HARNESS FOR THE CRANKSHAFT POSITION SENSOR MAY NOT BE SECURED CORRECTLY INTO POSITION View/hide..
Recalls Number (Vehicles Effected)R/2021/348 (692)
Manufacturer Reference21S45
DefectDue to a production error the wiring harness for the crankshaft position sensor may not be secured correctly into position.
RemedyThe crankshaft position sensor harness securing clip must be pushed into the vacant hole on the engine front cover.
|
05/02/21 | | Raised: 14/04/21 - VEHICLE SEATBELTS MAY HAVE A DEFECTIVE LOW G LOCKING MECHANISM View/hide..
Recalls Number (Vehicles Effected)R/2021/123 (1528)
Manufacturer Reference21S13
DefectVehicle seatbelts may have a defective low G locking mechanism.
RemedyInspect the seat belt label for date range. If within suspect range exchange seat belt retractor.
|
15/05/19 | | Raised: 08/01/20 - OUT OF SPECIFICATION STEERING COLUMN View/hide..
Recalls Number (Vehicles Effected)R/2019/426 (90)
Manufacturer Reference19S47
DefectOut of specification steering column
RemedyReplace the steering column
|
18/09/19 | | Raised: 19/12/19 - REAR SEAT LATCHES AND CENTRE SEAT BELT RETRACTOR BOLTS MAY NOT BE TIGHTENED TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2019/410 (15)
Manufacturer Reference19S46
DefectRear seat latches and centre seat belt retractor bolts may not be tightened to specification.
RemedyAffected bolts are to be torqued to specification.
|
05/12/17 | | Raised: 15/03/18 - BRAKE SERVO MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2018/039 (4757)
Manufacturer Reference17U26
DefectAffected vehicles may have been fitted with a brake booster which may have a faulty diaphragm plate. This could lead to a loss of brake servo assistance.
RemedyAn affected brake booster can be identified by its date of manufacture. This can be found on a label on the brake booster. An affected brake booster must be removed and replaced a new one.
|
26/02/16 | | Raised: 27/10/16 - SEAT BELT ANCHOR BOLT SECURITY View/hide..
Recalls Number (Vehicles Effected)R/2016/239 (15)
Manufacturer Reference16S37
DefectIt has been identified that during production a small number of Fiesta's may not have had the right-hand side front seatbelt top anchor bolt tightened to the correct specification. This may result in the mounting not performing as intended if the vehicle is involved in a collision.
RemedyRecall all affected vehicles to torque the right-hand side front seatbelt top anchor bolts to the correct specification.
|
05/07/16 | | Raised: 14/10/16 - REAR AXLE MAY DETACH View/hide..
Recalls Number (Vehicles Effected)R/2016/231 (69)
Manufacturer Reference16S33
DefectThere may not be adequate welding on one of the rear axle side arm bush housings. Therefore it is possible for the twist beam to become detached from the vehicle.
RemedyRecall the vehicles that are likely to be affected and fit a new rear twist axle.
|
01/01/12 | | Raised: 01/09/16 - FIRE MAY OCCUR View/hide..
Recalls Number (Vehicles Effected)R/2016/187 (41304)
Manufacturer Reference16S09
DefectThe Glow Plug Control Module (GPCM) can be affected by wet conditions. It is not waterproof and water ingress into the module may cause overheating with the potential to result in a fire. As the GPCM has a permanent electrical live feed there is also a potential risk of an unattended vehicle fire.
RemedyReplace the Glow Plug Control Module
|
16/04/10 | | Raised: 04/03/15 - RELAY MAY OVERHEAT AND CATCH FIRE View/hide..
Recalls Number (Vehicles Effected)R/2015/033 (10265)
Manufacturer Reference15S04
DefectOn affected vehicles the diesel engine Glow Plug Control Module previously repalced under Recall R/2014102 may not be not waterproof and water ingress into the module may cause overheating with the potential to result in a fire. As the GPCM has a permanent electrical live feed there is also a potential risk of an unattended vehicle fire.
RemedyRecheck those vehicles which may have had a suspect replacement fitted and replace module with correct waterproof version
|
23/09/14 | | Raised: 16/01/15 - REAR SEAT BELT BUCKLE LATCH MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2015/008 (9257)
Manufacturer Reference4U626
DefectThe rear seat belt buckle (catch) could be defective. In the event of a frontal impact a defective buckle could fail causing the rear seat occupant to be unrestrained by the seat belt.
RemedyRecall the vehicles that are likely to be affected to check the rear seat belt buckles and if found to be part of the defective batch new buckles will be fitted.
|
01/01/10 | | Raised: 05/11/14 - POSSIBLE RISK OF FIRE View/hide..
Recalls Number (Vehicles Effected)R/2014/102 (41444)
Manufacturer Reference4C564
DefectOn affected vehicles the diesel engine Glow Plug Control Module can be affected by wet conditions. The GPCM is not waterproof and water ingress into the module may cause overheating with the potential to result in a fire. As the GPCM has a permanent electrical live feed there is also a potential risk of an unattended vehicle fire.
RemedyReplace existing module with waterproof version
|
13/09/11 | | Raised: 28/02/12 - REAR SUSPENSION BOLTS MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2012/012 (889)
Manufacturer Reference1U407
DefectVehicles may have rear axle mounting bolts that do not meet the required specification. It is possible that the head of the bolt may shear and result in reduced retention of the rear axle.
RemedyFit replacement bolts of the correct specification.
|
| | Raised: 12/12/11 - FUMES MAY ENTER THE PASSENGER COMPARTMENT View/hide..
Recalls Number (Vehicles Effected)R/2011/158 (5857)
Manufacturer Reference1c147
DefectBlanking plug on the exhaust may not retain the correct tightness. In rare cases it is possible that the plug may work out completely leaving an open hole in the exhaust system. The hot gases may be hot enough to melt the plastic of the engine cooling fan moulding. Although no cases have been reported there is a risk of fire in the engine compartment.
RemedyReplace the brass plug with a steel plug of a new design.
|
08/10/07 | | Raised: 28/11/07 - POWER STEERING MAY BE LOST View/hide..
Recalls Number (Vehicles Effected)R/2007/167 (7000)
Manufacturer Reference7C148
DefectIt has been identified that the power steering pump drive belts could de-laminate and fail. Should this occur drive to the power steering pump would be lost likewise the assistance to the steering.
RemedyRecalled vehicles will have the power steering drive belts checked and renewed should they be found to be within the affected batch.
|
18/08/06 | | Raised: 06/08/07 - POTENTIAL LOSS OF STEERING CONTROL View/hide..
Recalls Number (Vehicles Effected)R/2007/105 (496)
Manufacturer Reference7C124
DefectIt has been identified that a small number of Fiesta and Fusion vehicles may have been built with a steering column which may have suffered damage by inappropriate handling prior to vehicle production. In rare cases there may be damage to the column upper universal joint which could result in loss of steering control.
RemedyRecalled vehicles will have the steering column universal joint inspected for signs of damage. If damage is found the steering column assembly will be replaced.
|
14/07/04 | | Raised: 11/04/05 - FUEL RETURN PIPE LEAK View/hide..
Recalls Number (Vehicles Effected)R/2005/026 (904)
Manufacturer Reference
DefectThe fuel return pipe is not specification and will degrade. This could lead to seapage of fuel.
RemedyRecall the vehicles that are likely to be affected and replace the fuel return pipe.
|
28/08/02 | | Raised: 07/03/03 - WELD SEAM ON REAR AXLE IS NOT TO SPECIFICATION View/hide..
Recalls Number (Vehicles Effected)R/2003/038 (1311)
Manufacturer Reference3U874
DefectThe weld seam securing the brake unit mounting plate to the rear axle may not be to specification on a small number of vehicles within the affected range..
RemedyCheck the production date code and replace the axle where found necessary.
|
01/08/01 | | Raised: 12/08/02 - AIR BAG WARNING LAMP View/hide..
Recalls Number (Vehicles Effected)R/2002/110 (11352)
Manufacturer Reference2C831
DefectAir bag warning lamp may fail to illuminate continuously when a fault is identified in the front crash detectors.
RemedyReplace air bag control module with a later specification unit
|
30/03/98 | | Raised: 17/12/98 - REDUCTION IN BRAKING EFFICIENCY View/hide..
Recalls Number (Vehicles Effected)R/1998/115 (1142)
Manufacturer Reference
DefectPossible loss of one braking circuit due to brake master cylinder failure
RemedyAffected vehicles are being recalled for checking and where necessary replacement of the brake master cylinder.
|
01/07/95 | | Raised: 18/09/96 - POSSIBLE CONTAMINATION OF BRAKE FLUID View/hide..
Recalls Number (Vehicles Effected)R/1996/084 (81112)
Manufacturer Reference
DefectThe clutch system hydraulic hoses have been manufactured from a material which contains mineral oil. Since the clutch and brake systems share a common fluid reservoir fluid from the clutch system which has been contaminated by contact with the hoses may m
RemedyRecall the affected vehicles for the fitment of new seals to the brake master cylinder. At the same time the brake/clutch hydraulic systems will be purged of the original fluid and new clutch hoses will be fitted. In addition vehicles built prior
|
01/07/95 | | Raised: 10/06/96 - VARIOUS - BRAKE AND CLUTCH RELATED View/hide..
Recalls Number (Vehicles Effected)R/1996/059 (2704)
Manufacturer Reference
Defect1) Due to a defect in the clutch master cylinder the clutch may not disengage. 2) Water ingress to brake servo. 3) The front brake hoses may be incorrectly routed and could in some circumstances contact the retaining bracket nut. 4) Possible contamination
RemedyRecall the affected vehicles and:- 1) Check build date and replace clutch master cylinder where required. 2) Fit a water shield to the brake servo to protect the servo push rod. 3) Check the routing of the front brake hoses re-routing where required.
|
19/06/95 | | Raised: 23/01/96 - FAILURE OF BRAKING SYSTEM VACUUM ASSISTANCE View/hide..
Recalls Number (Vehicles Effected)R/1996/022 (56864)
Manufacturer Reference
DefectThe brake vacuum pump may cease to provide vacuum assistance. Should this occur greater brake pedal pressure would be needed and stopping distances may be increased.
RemedyThe affected vehicles are being recalled to Ford dealers to have the brake pump manufacturing codes checked. Vacuum pumps within certain ranges will be replaced with new units. This campaign supersedes recall R1995/081 and includes all the vehicles alrea
|
03/04/95 | | Raised: 20/11/95 - STOP LIGHT SWITCH MAY BE FAULTY View/hide..
Recalls Number (Vehicles Effected)R/1995/080 (11760)
Manufacturer Reference
DefectThe stop light switch on a small number of the subject vehicles may not operate as intended. Should this occur the stop lights may fail to illuminate when the footbrake is applied.
RemedyRecall the affected vehicles for replacement of the stop light switch with a switch of the latest specification.
|