HYUNDAI TRAJET UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2010/091 (16927)

Manufacturer Reference

Defect

Trajet and Sante Fe - Corrosion may build up and weaken the rear suspension arms to an extent where they could fail and the directional control of the vehicle could be affected. Sante Fe models additionally have a similar concern with the front sub-frame.

Remedy

Recall the vehicles that are likely to be affected to test the thickness of the metal of the suspension arms. If the corrosion is not too advanced the arms/sub-frame will be wax oiled. If the corrosion is advanced the suspension arms will have to be changed.

---

Recalls Number (Vehicles Effected)

R/2010/091 (16927)

Manufacturer Reference

Defect

Trajet and Sante Fe - Corrosion may build up and weaken the rear suspension arms to an extent where they could fail and the directional control of the vehicle could be affected. Sante Fe models additionally have a similar concern with the front sub-frame.

Remedy

Recall the vehicles that are likely to be affected to test the thickness of the metal of the suspension arms. If the corrosion is not too advanced the arms/sub-frame will be wax oiled. If the corrosion is advanced the suspension arms will have to be changed.

---

Recalls Number (Vehicles Effected)

R/2004/152 (5869)

Manufacturer Reference

Defect

Premature wear of the hand brake cable resulting in hand brake failure.

Remedy

Likely to be affected vehicles will be recalled and fitted with a hand brake cable of an improved design.

---

Recalls Number (Vehicles Effected)

R/2003/166 (711)

Manufacturer Reference

31b037

Defect

On Diesel engined vehicles it is possible for the water separator sensor to leak which in turn causes a diesel fuel leak.

Remedy

Recall affected vehicles and check water separtaor for damage and replace where necessary.

---

Recalls Number (Vehicles Effected)

R/2003/109 (419)

Manufacturer Reference

Defect

The threaded portion of the water separator sensor sub assembly in the fuel filter may break if overtightened when fitting the sensor to the fuel filter housing following draining. This could result in a fuel leak and unscheduled shut down of the engine.

Remedy

Examine the water separator sensor for damage and replace where necessary. In addition issue technical information to the dealers giving details of the torque specification for this component.