JAGUAR F TYPE UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2022/223 (493)

Manufacturer Reference

H412

Defect

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Remedy

Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

---

Recalls Number (Vehicles Effected)

R/2021/248 (2)

Manufacturer Reference

H365

Defect

The passenger airbag deployment door integrated in the instrument panel facia contains an additional mesh layer.

Remedy

Replace the affected instrument panel facia with a part manufactured to the correct specification.

---

Recalls Number (Vehicles Effected)

R/2021/026 (1)

Manufacturer Reference

H286

Defect

An incorrect front bumper reinforcement panel has been fitted at the manufacturing plant.

Remedy

Replace the necessary component with a modified part.

---

Recalls Number (Vehicles Effected)

R/2019/273 (336)

Manufacturer Reference

H249

Defect

Static noise level exceeds the regulated maximum decibel limit.

Remedy

Update the vehicle software to the latest version.

---

Recalls Number (Vehicles Effected)

R/2019/048 (4874)

Manufacturer Reference

H185

Defect

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Remedy

Update the vehicle software to the latest version.

---

Recalls Number (Vehicles Effected)

R/2019/014 (29)

Manufacturer Reference

H181

Defect

The crankshaft pulley retaining bolt may fracture due to a production specification error.

Remedy

Replace the crankshaft pulley centre retaining bolt with one that has been manufactured to the correct specification.

---

Recalls Number (Vehicles Effected)

R/2018/035 (4464)

Manufacturer Reference

H081

Defect

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Remedy

On affected vehicles replace the fuel rail with a correctly manufactured version.

---

Recalls Number (Vehicles Effected)

R/2017/170 (875)

Manufacturer Reference

H026

Defect

The driver will not be alerted to a failure of one or both of the front directional indicator lamps. This could lead to an extended period of driving with failed lamps where other drivers will not have clear indication of the driver?s intent.

Remedy

Recall the vehicles that are likely to be affected and update the vehicle with the latest software.

---

Recalls Number (Vehicles Effected)

R/2017/004 (4735)

Manufacturer Reference

J081

Defect

It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none activation of the pre-tensioner.

Remedy

Recall all affected vehicles to check the pre-tentioner and if required replace it with a new quality assured component.

---

Recalls Number (Vehicles Effected)

R/2016/248 (14)

Manufacturer Reference

J076

Defect

A bolt retaining the rear lower control arm to rear knuckle joint fixing may not have been tightened to correct specification. Failure of the bolt could affect control of the vehicle.

Remedy

On affected vehicles replace the rear lower control arm to rear knuckle joint fixing

---

Recalls Number (Vehicles Effected)

R/2016/099 (1932)

Manufacturer Reference

JO67

Defect

An incorrectly manufactured crank position sensor may cause the engine to unexpectedly cut out or not to start.

Remedy

On recalled vehicles the engine serial number will be checked and if within the affected range the crank position sensor will be replaced.

---

Recalls Number (Vehicles Effected)

R/2015/181 (8)

Manufacturer Reference

P055

Defect

The electric power steering system may still be set in the factory operating mode. In this condition where another defect arises with the electric power steering system the driver may experience additional unexpected steering inputs from the electric power steering system. These additional system generated steering inputs may exceed the ability of a normal driver who may lose vehicle control with no warning. This can increase the risk of a crash.

Remedy

Recall the vehicles that are likely to be affected to either 1. inspect the electronic power steering software version and where necessary download the correct software or 2. where the vehicle is not accessible to the supplier due to logistical reasons the dealer will replace the steering rack with a steering rack built to the correct specification.

---

Recalls Number (Vehicles Effected)

R/2015/115 (89)

Manufacturer Reference

J053

Defect

Anti-Roll bars of incorrect specification have been fitted to vehicles equipped with All Wheel Drive (AWD) with Constantly Variable Damping (CVD). In this mis-built condition at the extremes of adhesion and in an over steer situation the Dynamic Stability Control (DSC) system will not mitigate the over steer. The drivers will most likely loose vehicle control of the vehicle. This can increase the risk of a crash.

Remedy

Recall the vehicles that are likely to be affected and replace the rear Anti-roll bar with the correct specification component.

---

Recalls Number (Vehicles Effected)

R/2014/090 (102)

Manufacturer Reference

J043

Defect

Due to an issue with the software in the engine management system (EMS) it is possible that the EMS will not restrict the vehicle speed to 137mph if the Deployable Rear Spoiler (DRS) does not deploy when it should . This can affect vehicle stability; although this should not affect vehicles used in the UK due to the National Speed Limit however it could affect vehicles that travel to Europe or are used on private grounds.

Remedy

Recall all affected vehicles to have new software installed.

---

Recalls Number (Vehicles Effected)

R/2014/145 (2612)

Manufacturer Reference

J044

Defect

The positive cable fixing to the alternator may come loose and lead to an elevated risk of fire. Additionally there are concerns raised regarding the fixings for the engine mounted belt driven ancillaries. If the fixings fail power assistance to the steering can be lost and more input from the driver will be required to steer the vehicle.

Remedy

Recall the vehicles that are likely to be affected to inspect and torque the front ancillary fixings to the correct specification.