Date From | Date To | Concern |
---|
01/09/04 | | Raised: 23/04/07 - DIESEL PARTICULATE FILTER EXCESSIVE HEAT View/hide..
Recalls Number (Vehicles Effected)R/2007/045 (8028)
Manufacturer Reference
DefectThe diesel particulate filters (DPF) of the 2.7 litre engine may exhibit smoke and or fire from the underside of the vehicle flames emanating from within the rear exhaust tailpipe or an orange glow from the underside of the vehicle. Heat from within the DPF can radiate to the surrounding vehicle components and may lead to heating of the underside of the transmission tunnel and subsequent melting of interior components with the potential for an interior fire.
RemedyRecalled vehicles will have the engine management control module re-programmed with the latest calibration file. The vehicle will self test for DPF blockage which where required will be replaced.
|
| | Raised: 30/11/05 - THE PARKING FUNCTION OF THE AUTOMATIC TRANSMISSION MAY NOT OPERATE CORRECTLY View/hide..
Recalls Number (Vehicles Effected)R/2005/155 (109)
Manufacturer ReferenceR525
DefectDue to the presence of an out of specification component within the automatic gearbox parking brake interlock system. The parking function may not fully engage when the operating lever is moved to park despite all indicators showing that park has been achieved. If the parking brake is not applied the vehicle may roll away if the ignition key remains in the ignition.
RemedyRecalled vehicles will have the out of specification component replaced with a quality assured item.
|
02/03/04 | | Raised: 06/10/04 - POOR ADHESION OF SPACE SAVER SPARE WHEEL SPEED RESTRICTION LABEL View/hide..
Recalls Number (Vehicles Effected)R/2004/156 (2055)
Manufacturer ReferenceR516
DefectOn vehicles supplied with a space saver spare wheel poor adhesion of the speed restriction label could result in the label becoming detached.
RemedyLikely to be affected vehicles will be recalled at which time the speed restriction label will be replaced.
|
11/11/02 | | Raised: 06/10/04 - POSSIBILE UNINTENTIONAL APPLICATION OF PARKING BRAKE View/hide..
Recalls Number (Vehicles Effected)R/2004/164 (4)
Manufacturer ReferenceR167
DefectThe possibility exists that the electronic parking brake (EPB) may apply unintentionally which can result in the vehicle decelerating and in extreme cases cause the rear wheels locking up.
RemedyRecall likely to be affected vehicles and replace the electronic parking brake module on those vehicles equipped with the AF level of module with one of a later level. Additionally add a link lead and wiper motor suppression module.
|
01/07/01 | | Raised: 02/03/04 - AUTO GEARBOX MAY ENGAGE REVERSE WHEN IN FORWARD DRIVE. View/hide..
Recalls Number (Vehicles Effected)R/2004/003 (13911)
Manufacturer ReferenceR513
Defect(a) In conditions of low oil pressure or a sticking valve in the gearbox with the vehicle stationary in Drive the gearbox will without warning or indication select Reverse. (b) With the vehicle moving forward in 1st 2nd or 3rd gear reverse may be selected without any manual input in the event of a loss of oil pressure in the transmission.
RemedyReprogramme the gearbox gear selector module.
|
01/01/99 | | Raised: 23/11/00 - FRONT LOWER SUSPENSION BALL JOINT MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2000/119 (18062)
Manufacturer ReferenceR136
DefectAn under torque condition may exist in the front lower ball joint. This may result in a high bending fatigue loading of the joint which could result in a fracture of the first thread of the ball stud which then leads to separation of the lower control arm from the knuckle. This separated condition will limit steering control.
RemedyRecall affected vehicles and check ball joint security and condition. Replace vertical link if necessary.
|
01/05/00 | | Raised: 04/10/00 - SEAT BELT BUCKLE CONCERN View/hide..
Recalls Number (Vehicles Effected)R/2000/089 (2104)
Manufacturer ReferenceR134
DefectA component within each front seat belt buckle may have received insufficient heat treatment. This may result in unintentional release of the set belt latch if it is subjected to a loading which exceeds the standard specified by EEC Regulation 16 during an accident.
RemedyRecall vehicles and check production date codes on both front seat belt buckle assemblies. Replace all buckle assemblies falling within the affected production dates with quality assured units.
|