LAND ROVER DISCOVERY SPORT UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2022/222 (2981)

Manufacturer Reference

N720

Defect

Damaged front seat belt pretensioner tube may have been installed on the seat belt retractor.

Remedy

Inspect the seat belt pretensioner tube for damage and if damage is identified the seat belt retractor will be replaced.

---

Recalls Number (Vehicles Effected)

R/2021/231 (7502)

Manufacturer Reference

N590

Defect

The rubberised fuel return hose assembly may have been incorrectly manufactured.

Remedy

Inspect the date code on the fuel return pipe and replace the part if necessary.

---

Recalls Number (Vehicles Effected)

R/2020/322 (45275)

Manufacturer Reference

N503

Defect

An electrical overload event in the 48Volt (V) electrical system may cause a failure of the Metal Oxide Semiconductor Field Effect Transistor.

Remedy

The vehicles will be updated with the latest software which mitigates the electrical failure condition.

---

Recalls Number (Vehicles Effected)

R/2019/049 (4779)

Manufacturer Reference

N291

Defect

Vehicles failed to routinely achieve the required levels of CO2 emissions.

Remedy

Update the vehicle software to the latest version.

---

Recalls Number (Vehicles Effected)

R/2018/036 (1537)

Manufacturer Reference

N138

Defect

The brazing of the fuel rail end caps is inconsistent and may not correctly seal the fuel rail ends. Fuel vapour and liquid fuel leaks can occur over time. This can lead to a liquid fuel leak into the engine bay.

Remedy

On affected vehicles replace the fuel rail with a correctly manufactured version.

---

Recalls Number (Vehicles Effected)

R/2017/153 (479)

Manufacturer Reference

N030

Defect

The locking ring retaining the fuel delivery module into the fuel tank may not have been correctly assembled onto the fuel tank during the tank assembly process. The driver may smell an increase in fuel odour and in some circumstances with the vehicle static there could be liquid fuel underneath the rear of the vehicle which in the presence of an ignition source could lead to a fire. It is also possible for fuel to leak onto the road surface which in the case of diesel fuel can present a skid hazard to other road users increasing the risk of a crash.

Remedy

Recall the vehicles that are likely to be affected and inspect the fuel pump module retaining ring ensuring it is tightened to the correct specification if required.

---

Recalls Number (Vehicles Effected)

R/2016/303 (8628)

Manufacturer Reference

P095

Defect

It has been identified by the seat belt Pre-Tensioner manufacturer that the pre-tensioner initiator generant mix ratio does not meet specification. This can therefore result in the initiator not functioning correctly which can lead to none activation of the pre-tensioner.

Remedy

Recall all affected vehicles to check the pre-tentioner and if required replace it with a new quality assured component.

---

Recalls Number (Vehicles Effected)

R/2016/302 (9261)

Manufacturer Reference

P096

Defect

Vehicles included in safety recall R/2016/302 (P075) have received a modification which has subsequently been determined as not durable for the life of the vehicle. The engine harness may chafe on an engine bracket and cause engine malfunction. In extreme cases the engine may cut out.

Remedy

On affected vehicles inspect harness and repair as necessary. Fit new bracket and secure harness.

---

Recalls Number (Vehicles Effected)

R/2016/131 (37059)

Manufacturer Reference

P085

Defect

The under bonnet fuel hoses routed on top of the engine may chafe against a plastic moulded noise suppressing material retaining posts on the underside of the engine top cover. The fuel hoses can over time chafe through the protective sleeve and fuel hose. Should the fuel hose wear through there will be an increased diesel fuel odour due to diesel fuel leaking. If this warning is ignored diesel fuel may leak onto the exhaust manifold (potential fire hazard) or onto the road surface (potential skid hazard).

Remedy

Recall the vehicles that are likely to be affected and ensure the securing washers are pushed fully home. Additionally remove 8mm from the plastic moulded retaining posts. The tape wrapped around the fuel hose protective sleeve and the fuel hose will be visually inspected and replaced if there are signs of damage.

---

Recalls Number (Vehicles Effected)

R/2015/258 (1)

Manufacturer Reference

P076

Defect

A rework where bonded glass was removed and refitted may have used an incorrect combination of adhesive preparation chemicals and glass adhesive.

Remedy

Owner will be instructed to take vehicle to a Land Rover dealer who will remove the affected glazing panels and re-assemble using the correct specification bonding agents.