MASERATI GHIBLI UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2021/441 (37)

Manufacturer Reference

450

Defect

Wrong TVV (Type-Variant-Version) on statutory plate.

Remedy

Replace label located on B Pillar

---

Recalls Number (Vehicles Effected)

R/2020/185 (2)

Manufacturer Reference

397

Defect

Engine code marked on Diesel engine replaced in aftersales is different from the homologated and Production code

Remedy

Documentation will be provided to the customer stating the Italian transport authority confirm this marking is an administration error.

---

Recalls Number (Vehicles Effected)

R/2019/239 (320)

Manufacturer Reference

387

Defect

Front headlamps full LED version headlamp vertical beam out of compliance.

Remedy

Check and adjustment of the front headlamp vertical beam.

---

Recalls Number (Vehicles Effected)

R/2019/042 (126)

Manufacturer Reference

378

Defect

There is a possibility that a leak may occur in the fuel line.

Remedy

Replacement of the fuel delivery line.

---

Recalls Number (Vehicles Effected)

R/2018/022 (53)

Manufacturer Reference

363

Defect

Due to material imperfections the fuel delivery line may leak at line unions. This is more likely after prolonged use.

Remedy

On affected vehicles replace the fuel delivery line.

---

Recalls Number (Vehicles Effected)

R/2017/235 (3844)

Manufacturer Reference

342

Defect

"Some vehicles may have been manufactured with an incorrect driver seat wiring harness layout which can cause the seat wiring harness to rub against metal points on the seat/seat frame assembly through normal seat adjustment operation. Over time this can lead to aninoperative seat adjustment system and in rare cases a potential risk of fire due to an electrical short to ground between the seat wiring harness and the seat adjustment motor assembly."

Remedy

Replace 2 seat circuit breakers with 25 amp mini-fuses check harness apply protective barrier and reposition if undamaged. If damaged replace harness and then ensure repositioned and protective barrier applied.

---

Recalls Number (Vehicles Effected)

R/2017/086 (283)

Manufacturer Reference

339

Defect

There is a possibility that a leak may occur in the fuel delivery line. Prolonged use of the car could result in the possibility of a fuel leak at the engine end of the pipe where the quick release connector is fitted.

Remedy

Recall the vehicles that are likely to be affected and replace the complete fuel delivery line.

---

Recalls Number (Vehicles Effected)

R/2017/051 (1039)

Manufacturer Reference

307

Defect

"It has been identified that the gearshift lever resting position may mislead driversinto believing the vehicle's transmission is in the park position when actually the it is still in a drive gear. This could result in the vehicle moving off without the driver being in the vehicle."

Remedy

Recall all affected vehicles to replace the driver's door lock and update the software to introduce a drive away inhibition strategy.

---

Recalls Number (Vehicles Effected)

R/2016/278 (30)

Manufacturer Reference

328

Defect

It has been identified that the locking nut of the differential pinion may not have been tightened to the correct specification. This will be identified to the driver by noise generated from the differential and also possible vibration. If these warning signs are ignored and with prolonged use in this condition then it could result in a possible failure/locking of the differential and the subsequent loss of control of the vehicle.

Remedy

Recall all affected vehicle to check the tightness of the locking nut on the differential pinion. If it is found to be incorrect then the differential will be replaced and possibly the drive-shaft if projections or metal contaminates are found in the differential rear cover.

---

Recalls Number (Vehicles Effected)

R/2016/226 (5)

Manufacturer Reference

310

Defect

Due to a manufacturing issue the front wheel bearing can become noisy and vibrate. If the driver does not take notice of these warnings then the bearing could fail and cause loss of control of the vehicle.

Remedy

Recall all affected vehicles to check and if required replace the front wheel bearing.

---

Recalls Number (Vehicles Effected)

R/2016/122 (2453)

Manufacturer Reference

303

Defect

In extreme and hard driving conditions it is possible for the rear tie rod fixing bolt to become loose which can ultimately result in loss of vehicle control.

Remedy

Recall the vehicles that are likely to be affected and replace both rear toe in tie rod bolts and washers fixing points will be inspected and rear hub assembly replaced if unserviceable.

---

Recalls Number (Vehicles Effected)

R/2016/046 (2773)

Manufacturer Reference

301

Defect

Throttle pedal may jam in any position. This can lead to a heightened risk of a collision.

Remedy

Recall the vehicles that are likely to be affected and replace the throttle pedal cover carpet mats carpet mat fixings modify floor covering depending on VIN list and inspection.