MITSUBISHI COLT UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2021/240 (19699)

Manufacturer Reference

R30399

Defect

The airbag inflator might have a different airbag deployment performance than designed providing less protection.

Remedy

The driver side frontal airbag will be replaced with an alternate inflator.

---

Recalls Number (Vehicles Effected)

R/2015/158 (2790)

Manufacturer Reference

R3027911

Defect

A connector pin for the electronic power steering may not be to specification. This will lead to increased resistance in the circuit causing the Electronic Power Steering (EPS) to stop working. The steering will still function in manual mode requiring increased input from the driver. The EPS warning lamp may illuminate temporarily.

Remedy

Recall the vehicles that are likely to be affected and replace the EPS Gear and Link assembly.

---

Recalls Number (Vehicles Effected)

R/2012/016 (64)

Manufacturer Reference

R041Z110

Defect

It is possible that air has been trapped within the fuel pump mounting cap mouldings which could lead to the cap cracking and fuel vapour and/or fuel might leak from the tank.

Remedy

Recall the vehicles that are likely to be affected to replace the fuel pump mounting cap.

---

Recalls Number (Vehicles Effected)

R/2001/168 (1687)

Manufacturer Reference

Defect

The crankshaft pulley may become loose causing a rattling noise from the engine battery warning light to come on and a high steering effort will be noticed.

Remedy

All recalled vehicles will have the crankshaft pulley bolt tightened to the correct specified torque.

---

Recalls Number (Vehicles Effected)

R/2000/083 (4246)

Manufacturer Reference

Defect

The Crankshaft Pulley securing bolt may not have been correctly torqued. The bolt may loosen or break and in the worst case result in detachment of the pulley.

Remedy

All engines up to engine number YD2145 - remove pulley securing bolt increase the depth of the thread in the Crankshaft by 5 mm. Check bolt for damage and renew if necessary. Lubricate threads refit and tighten to specified torque. Engines numbered from YD2146 onwards - remove pulley securing bolt examine for damage and renew if necessary lubricate threads refit and tighten to specified torque.

---

Recalls Number (Vehicles Effected)

R/1997/074 (218)

Manufacturer Reference

Defect

The brake booster vacuum hose check valve may stick and cause a loss of vacuum to the brake booster. This will result in greatly increased brake pedal effort and increased stopping distances.

Remedy

The affected vehicles are being recalled to have the brake booster vacuum hose replaced with a quality assured unit.

---

Recalls Number (Vehicles Effected)

R/1994/073 (169)

Manufacturer Reference

Defect

It is possible that installation of the front brake hoses has not been correctly carried out during initial assembly.

Remedy

Recall the affected vehicles for the fitment of replacement brake hoses.