Date From | Date To | Concern |
---|
09/01/04 | | Raised: 25/01/19 - ACTIVATION OF A NON-DESSICATED AMMONIUM NITRATE INFLATOR WITH DEGRADED PROPELLANT MAY RESULT IN AN INFLATOR RUPTURE View/hide..
Recalls Number (Vehicles Effected)R/2018/355 (13756)
Manufacturer ReferenceR3035811 R3035821 R3035840
DefectActivation of a non-desiccated ammonium nitrate inflator with degraded propellant may result in an inflator rupture.
RemedyReplace the airbag inflator (LANCER) or the airbag module (i) with a new non-AN (ammonium nitrate) based unit.
|
06/12/07 | | Raised: 28/07/16 - INDICATORS AND/OR OTHER VEHICLE LIGHTS MAY SWITCH OFF OR BLINK WITHOUT WARNING View/hide..
Recalls Number (Vehicles Effected)R/2016/155 (1801)
Manufacturer ReferenceR3030610
DefectDue to poor connectivity the indicators and/or vehicle lights may turn off or blink
RemedyOn affected vehicles apply lubricant to switch connections
|
07/05/14 | | Raised: 26/01/16 - FUEL MAY LEAK View/hide..
Recalls Number (Vehicles Effected)R/2015/219 (40)
Manufacturer ReferenceR3029610 R3029611
DefectThe right hand side parking brake cable may interfere with the fuel tank. As a result there is possibility of peeling off the coating on the fuel tank. In the worst case the fuel tank can corrode and leak. Leaking fuel is a risk to other road users.
RemedyRecall the vehicles that are likely to be affected and replace the right hand side parking brake cable with a new one. In addition the fuel tank will be checked and if necessary replaced.
|
06/12/07 | | Raised: 28/11/14 - LOSS OF POWER STEERING ASSISTANCE View/hide..
Recalls Number (Vehicles Effected)R/2014/124 (3885)
Manufacturer ReferenceR30271XX
Defect"Due to the use of inappropriate material for the drive belt on the 4B1 Petrolengine the nylon idler pulley(s) may wear at an angle. If this continues under thiscondition the drive belt will be forced off the pulleys. This can lead to battery depletionOverheating and on vehicles with hydraulic power steering the steering effort willincrease."
RemedyReplace drive belt. Check and if necessary replace idler pulley(s)
|
03/03/05 | | Raised: 25/07/14 - HEAD LIGHT AND INDICATOS MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2014/073 (1074)
Manufacturer ReferenceR3024642/643/644/645
DefectDue to a fault in the soldering process of the lighting switch circuit board it is possible that the solder on the lighting circuit switch can crack as a result of temperature changes during production. This can result in the lights or turn signals failing totally or blinking/flicker.
RemedyRecall all affected vehicles to inspect the switch and if required replace the switch assembly.
|
| | Raised: 18/11/13 - CLUTCH MAY FAIL View/hide..
Recalls Number (Vehicles Effected)R/2013/116 (529)
Manufacturer ReferenceR3022821
DefectDue to a deficiency in the manufacturing process the clutch master cylinder may fail which will lead to the inability to change gear and the engine will not restart if turned off or stalled.
RemedyRecall the vehicles that are likely to be affected to replace the clutch master cylinder with a modified unit.
|