NISSAN CABSTAR UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2017/101 (2487)

Manufacturer Reference

PV7B0

Defect

An an incorrect maximum permissible vehicle width was incorrectly defined on the Certificate of Conformity (COC) documentation. Due to this a customer installing a body conversion according to that defined on the COC may inadvertently fit a body width that could restrict the rear visibility.

Remedy

On affected vehciles measure the width of vehicle and where necessary fit extended mirrors

---

Recalls Number (Vehicles Effected)

R/2009/135 (1858)

Manufacturer Reference

PV9A1

Defect

There is a possibility that the lower steering column connecting rod may become disconnected resulting in loss of steering control.

Remedy

Recall affected vehicles to check and if necessary retorque steering rod bolts.

---

Recalls Number (Vehicles Effected)

R/2008/019 (28)

Manufacturer Reference

Defect

The engine may stall as a result of the crank shaft position sensor wiring harness being incorrectly routed and possibly coming into contact with the blades of the cooling fan.

Remedy

Recall the vehicles that are likely to be affected to check the wiring harness and re-route or replace the wiring harness as necessary.

---

Recalls Number (Vehicles Effected)

R/2007/065 (184)

Manufacturer Reference

Defect

There is a possibility that a rear wheel bearing may have been overtightened at the factory. If ignored this condition could result in reduced bearing life and ultimately the bearings could fail.

Remedy

Recall the vehicles that are likely to be affected to replace the rear wheel bearings.

---

Recalls Number (Vehicles Effected)

R/2007/064 (6)

Manufacturer Reference

Defect

A concern has been detected in relation to the passenger seat cushion anchorage of some F24 Cabstar vehicles. If ignored the condition could result in a potential for the seat occupant to not be fully restrained in the case of a vehicle collision.

Remedy

Recalled vehicles will have the (potentially) missing seat retaining bolt fitted.

---

Recalls Number (Vehicles Effected)

R/2004/208 (105)

Manufacturer Reference

pv403

Defect

A concern has been identified with the vacuum pump drive gear which could wear excessively due to insufficient surface hardness. If the condition is ignored gear wear could cause the pump to cease operating which results in the loss of brake assistance.

Remedy

Subject vehicles will be recalled at which time the vacuum pump drive gear will be replaced.

---

Recalls Number (Vehicles Effected)

R/2003/049 (1796)

Manufacturer Reference

pv301

Defect

In cold damp conditions the rear brake linings may swell and under light braking effort lock the rear wheels. This can adversely affect the vehicle's handling.

Remedy

Fit improved specification brake linings.

---

Recalls Number (Vehicles Effected)

R/2002/023 (1473)

Manufacturer Reference

pv204

Defect

Premature wear of the propshaft universal joint bearings may lead to noise vibration and eventual loss of drive.

Remedy

Recall affected vehicles and fit a new propshaft which has improved bearings.

---

Recalls Number (Vehicles Effected)

R/2002/022 (1524)

Manufacturer Reference

pv202

Defect

The locating dowel on the parking brake assembly may become detached. In this case any impact on the lever may cause its unintended release.

Remedy

Recall affected vehicles and fit a quality assured replacement parking brake assembly.