Date From | Date To | Concern |
---|
18/07/19 | | Raised: 02/11/20 - THE WELDED JOINT ON THE ACTUATOR PLATE WITHIN THE REDUCER MAY BE OF POOR QUALITY AND THE PARK LOCK MAY NOT ENGAGE View/hide..
Recalls Number (Vehicles Effected)R/2020/294 (2547)
Manufacturer ReferencePG0C9 PS0C5
DefectThe welded joint on the park lock actuator plate may be of poor quality and has the potential to fail during usage.
RemedyReplace the park lock actuator plate with a countermeasure part of all potentially affected vehicles
|
30/03/17 | | Raised: 05/09/18 - INTERNAL IGNITION SWITCH SPRING MAY HAVE BEEN MAUNFACTURED WITH A SURFACE DEFECT View/hide..
Recalls Number (Vehicles Effected)R/2018/234 (43)
Manufacturer ReferencePS8B5
DefectIgnition Switch spring defect may cause engine to be turned off while driving
RemedyInspect and where necessary replace the Ignition Switch
|
01/08/09 | | Raised: 31/08/16 - BACK DOORS / HATCHBACK MAY BE UNSUPPORTED WHEN OPEN View/hide..
Recalls Number (Vehicles Effected)R/2016/081 (4377)
Manufacturer ReferenceTBA
DefectThe paint coating applied to the back door gas stay does not comply with the design requirement for anti-corrosion. Therefore the outer tube of the gas stay may corrode and crack resulting in the loss of the pressurised gas inside the gas stay. In this condition the gas stay would be unable to support the opening of the back door allowing it to drop on the vehicle user.
RemedyRecall the vehicles that are likely to be affected and replace the back door gas stay.
|
17/02/12 | | Raised: 16/02/15 - LOSS OF STEER View/hide..
Recalls Number (Vehicles Effected)R/2015/007 (27252)
Manufacturer ReferencePG5B2 PS5B0
DefectIt is possible that the steering wheel boss may not have been produced to the correct specification. If a higher than normal loading is applied to the steering wheel typically on low speed manoeuvring it is possible that the steering wheel boss may separate from the steering column. This can result in a loss of steering control.
RemedyRecall all affected vehicles to check and if necessary replace the steering wheel assembly.
|
27/02/12 | | Raised: 24/09/12 - POSSIBLE LOSS OF STEERING View/hide..
Recalls Number (Vehicles Effected)R/2012/103 (7329)
Manufacturer ReferencePG2B9 & PG2B7
DefectIt is possible that the steering wheel boss may not have been produced to the correct specification. If a higher than normal loading is applied to the steering wheel in its normal operation it is possible that the steering wheel boss may separate from the steering column. This can result in a loss of steering control.
RemedyRecall all affected vehicles to check and if necessary replace the steering wheel assembly.
|
01/02/10 | | Raised: 08/06/10 - BRAKES MAY NOT OPERATE CORRECTLY View/hide..
Recalls Number (Vehicles Effected)R/2010/061 (125)
Manufacturer ReferencePSOB2
DefectThe clevis pin may displace from the brake pedal/brake booster input rod assembly as the clevis pin securing clip may not have been fitted at the factory.
RemedyRecall the vehicles that are likely to be affected to check and where necessary fit a clevis pin securing clip.
|