NISSAN QASHQAI UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2024/021 (9536)

Manufacturer Reference

R23D5

Defect

On affected vehicles the capacitive mat for hand on detection may have been damaged during manufacture of the steering wheel.? The steering wheel may falsely detect the driver has their hands on the wheel with ProPilot engaged and not give a warning to place hands back on the wheel.?

Remedy

Inspect the steering wheel serial number and replace with a new countermeasure part where necessary.?

---

Recalls Number (Vehicles Effected)

R/2023/232 (4)

Manufacturer Reference

PG3CC

Defect

On affected vehicles the child lock function on the rear door locks may be out of specification. The child lock may become disengaged when the inside door handle is operated.

Remedy

Replace the rear door lock assemblies on both sides with a countermeasure part.

---

Recalls Number (Vehicles Effected)

R/2021/386 (7)

Manufacturer Reference

PG1CP

Defect

Some steering rack trial parts were reintroduced into the normal production process.

Remedy

Replace the steering rack with a countermeasure part.

---

Recalls Number (Vehicles Effected)

R/2021/147 (10)

Manufacturer Reference

PG1CA

Defect

The incorrect weight information was applied to the Certificate of Conformity (COC).

Remedy

To proactively update the Certificate of Conformity (COC) and replace the vehicle registration document of all potentially affected vehicles.

---

Recalls Number (Vehicles Effected)

R/2020/220 (299631)

Manufacturer Reference

PS0C1 PG0C4

Defect

Possible reduced retention force of the Rear Door Child Lock switch.

Remedy

Fit a countermeasure part into the child lock door switch aperture of all potentially affected vehicles.

---

Recalls Number (Vehicles Effected)

R/2019/413 (12)

Manufacturer Reference

PG9BE

Defect

Incorrect permissible front axle figures were given on the VIN label.

Remedy

Replace VIN label with new

---

Recalls Number (Vehicles Effected)

R/2019/102 (10240)

Manufacturer Reference

PG8BR

Defect

The radiator fan assembly motor controller may have a ceramic capacitor fitted that can potentially fail.

Remedy

Replace radiator fan assembly with a countermeasure part.

---

Recalls Number (Vehicles Effected)

R/2018/092 (8385)

Manufacturer Reference

PG8B6

Defect

VIN label contains incorrect Gross Combination Weight (GCW) information for manual and CVT vehicles.

Remedy

On affected vehicles replace the VIN label with a new one showing the correct information.

---

Recalls Number (Vehicles Effected)

R/2018/091 (10791)

Manufacturer Reference

PG8B5 / PG8BB

Defect

Due to an incorrect software setting of the Body Control Module (BCM) the system may not trigger a warning (double speed flashing) in the case of a direction indicator lamp failure.

Remedy

On affected vehicles reprogram the Body Control Module.

---

Recalls Number (Vehicles Effected)

R/2017/281 (202)

Manufacturer Reference

PG7BK

Defect

The door mirror indicator repeater may not operate as intended when the heated rear screen is switched on.

Remedy

On affected vehicles inspect wiring and where necessaary rework the indicator connnections.

---

Recalls Number (Vehicles Effected)

R/2017/295 (25435)

Manufacturer Reference

PG6BF

Defect

In conditions such as high speed and high vehicle loading the rear right wheel arch protector may contact the brake hose. Over time repeated contact could wear through the outer protective cover of the brake hose. This could damage the inner reinforcing braiding and in an extreme case wear a hole in the hose which could lead to brake fluid leakage.

Remedy

On affected vehicles re-work the rear wheel arch protector and if necessary replace the brake pipe with new.

---

Recalls Number (Vehicles Effected)

R/2016/157 (7393)

Manufacturer Reference

A36/C13/F15/J11/T32

Defect

If an electrical short occurs in the supply to the rear oxygen sensor the senor will fail but the driver will not see an immediate warning. A MIL warning may display after continued driving depending on driving/vehicle characteristics.

Remedy

Reprogram the ECU to display a warning if the rear oxygen sensor fails.

---

Recalls Number (Vehicles Effected)

R/2014/157 (43238)

Manufacturer Reference

PG4BL

Defect

The bolted joints fixing the towbar kit to the chassis of the vehicle may loosen. In an extreme situation where the vehicle continues to be driven with loose bolted joints the towbar kit may detach from the vehicle.

Remedy

Recall the vehicles that are likely to be affected to inspect and where necessary rework the towbar kit.

---

Recalls Number (Vehicles Effected)

R/2012/103 (7329)

Manufacturer Reference

PG2B9 & PG2B7

Defect

It is possible that the steering wheel boss may not have been produced to the correct specification. If a higher than normal loading is applied to the steering wheel in its normal operation it is possible that the steering wheel boss may separate from the steering column. This can result in a loss of steering control.

Remedy

Recall all affected vehicles to check and if necessary replace the steering wheel assembly.

---

Recalls Number (Vehicles Effected)

R/2012/038 (796)

Manufacturer Reference

PG2B5

Defect

The fuel filter hose connector may not be fully connected to the fuel filter. If the vehicle continues to be driven in this condition a fuel leak may occur or in extreme conditions the engine may stall.

Remedy

Recall all affected vehicles and inspect the fuel filter hose connector. If found to be faulty carry out remedial work.

---

Recalls Number (Vehicles Effected)

R/2011/159 (2693)

Manufacturer Reference

PG1B5 & R1112

Defect

It has been established that the casting for the heat sink on the Electric Power Steering (EPS) control unit may be out of specification. In extreme cases this can cause a failure of the EPS motor which will illuminate a warning light on the dash. Whilst directional control is not affected it is possible that the driver will experience a sudden loss of power assistance.

Remedy

Recall all affect vehicles and replace the EPS control unit.

---

Recalls Number (Vehicles Effected)

R/2009/106 (58342)

Manufacturer Reference

PG9AC & R0906

Defect

The cover screw securing the pinion shaft may loosen causing noise during steering operation. Continued use in this condition could result in the screw coming out of the gear housing and in certain circumstances cause a loss of steering control.

Remedy

Recall the potentially affected vehicles to fit a locking plate to the cover screw that secures the pinion shaft.

---

Recalls Number (Vehicles Effected)

R/2008/174 (45)

Manufacturer Reference

Defect

It has been identified that a connector in the diesel particulate filter fuel system may not be correctly attached. If this is ignored fuel may leak from the connector during a particulate filter regeneration cycle.

Remedy

Recalled vehicles will have the connector checked and tightened as necessary.

---

Recalls Number (Vehicles Effected)

R/2008/117 (10)

Manufacturer Reference

Defect

There is a possibility that the air conditioning compressor may seize which could result in an unexpected engine stall.

Remedy

Recall the vehicles that are likely to be affected to replace the a/c compressor and the drive belt and idler roller.

---

Recalls Number (Vehicles Effected)

R/2008/063 (182)

Manufacturer Reference

Defect

There is a possibility that a steering cover screw may not be sufficiently tight. This could lead to initially free play and noise in the steering which if not attended to eventually could result in the loss of steering control.

Remedy

Recall the vehicles that are likely to be affected to inspect and where necessary replace the steering gear.

---

Recalls Number (Vehicles Effected)

R/2008/061 (9362)

Manufacturer Reference

Defect

It has been identified that the possibility exists that a needle bearing has been omitted from the steering shaft. Additionally the cover screw may not have been tightened to the correct torque. This may result in the cover screw becoming loose initiating free play and noise within the steering system. Ultimately steering control may be lost.

Remedy

Recalled vehicles will have the steering gear inspected. The steering gear will be replaced should this be found to be necessary.

---

Recalls Number (Vehicles Effected)

R/2007/062 (945)

Manufacturer Reference

Defect

It has been identified that the front suspension lower ball joints on some of the subject vehicles have not been fully seated into the hub. This has resulted in the securing bolt not fitting into the groove in the ball joint shank. If the situation goes uncorrected the ball joint could detach which could result in loss of vehicle control.

Remedy

Recalled vehicles will be checked for correct location of the ball joint and rectified as necessary.