PEUGEOT 107 UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2018/358 (70171)

Manufacturer Reference

JED

Defect

"On the affected vehicles the bonding of the rear door window glass to the hingeassemblies may not conform to specification."

Remedy

"Check and if necessary replace the rear window or re- bond the rear window glasshinges."

---

Recalls Number (Vehicles Effected)

R/2014/174 (1544)

Manufacturer Reference

ZVE

Defect

The front shock absorber rod may have an internal fault which could cause it to brake. This could have an adverse affect on the front suspension and the driver's ability to control the vehicle.

Remedy

On affected vehicles replace both front shock absorbers.

---

Recalls Number (Vehicles Effected)

R/2014/023 (453)

Manufacturer Reference

ZPS

Defect

On subject vehicles a weld on the rear cross member might be non-compliant and eventually cause the weld between the cross member and the vehicle body to break. This may lead to a partial detachment of the axle and cause the driver to lose control.

Remedy

Contact keepers using DVLA and manufacturer's records.Check the compliance of the weld on the O/S/R and if necessary replace the cross member.

---

Recalls Number (Vehicles Effected)

R/2012/135 (1851)

Manufacturer Reference

ZEW

Defect

It is possible that the con-rod bearing shells will not conform to manufacturer specification. This could lead to premature deterioration of the shells and in time cause the engine to fail.

Remedy

To replace the con-rod bearing shells

---

Recalls Number (Vehicles Effected)

R/2011/072 (3)

Manufacturer Reference

ZAR

Defect

The left hand side front chassis may have a nonconformity which may lead to a risk of poor securing of the suspension arm.

Remedy

Recall the vehicles that are likely to be affected to replace the left hand side front chassis member.

---

Recalls Number (Vehicles Effected)

R/2010/013 (6380)

Manufacturer Reference

YUU

Defect

It has been identified that within the mechanism of the accelerator pedal there is a friction lever which interacts with a sliding surface. Over time and under certain conditionsthe contact surfaces may generated excessive friction and latterly the movement of the accelerator pedal. This over time and under certain conditions will result in the accelerator pedal becoming intermittently more difficult to push; or slower to return. In rare instances the accelerator pedal can remain in the partially depressed position.

Remedy

Recalled vehicles will have a reinforcing plate fitted within the accelerator pedal mechanism which will ensure continued correct functionality.

---

Recalls Number (Vehicles Effected)

R/2009/076 (110)

Manufacturer Reference

YSM

Defect

A possible substandard tapping of one or more of the wheel stud holes may result in a reduction of the wheel stud to hub torque setting.

Remedy

Recall affected vehicles and replace hubs.