PEUGEOT 2008 UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2023/140 (29537)

Manufacturer Reference

MF9/221078CO

Defect

On affected vehicles the AC compressor stator wiring could develop a fault leading to current loss inside the AC compressor that could result in a vehicle powertrain shutdown when driving.?

Remedy

Reprogram the Powertrain Diagnosis ECU with updated software.

---

Recalls Number (Vehicles Effected)

R/2020/356 (773)

Manufacturer Reference

KEK

Defect

On affected vehicles there may be a defect in the operation of the urea injector which may become blocked leading to NOx emissions exceeding regulatory limits.

Remedy

Update the ECU software to avoid the blockage of the urea injector.

---

Recalls Number (Vehicles Effected)

R/2020/207 (38)

Manufacturer Reference

JSB

Defect

There is a possibility that the internal corrosion protection of the front subframe is not durable enough.

Remedy

Replacing the front subframe assembly.

---

Recalls Number (Vehicles Effected)

R/2019/352 (18267)

Manufacturer Reference

JPM

Defect

Engine management software issue could result in incorrect emission levels.

Remedy

Update the engine management software.

---

Recalls Number (Vehicles Effected)

R/2019/330 (9218)

Manufacturer Reference

JMK

Defect

The calibration of the engine management software could result in emissions of NOx which do not comply with the regulatory limits.

Remedy

Download new engine management software

---

Recalls Number (Vehicles Effected)

R/2019/136 (2686)

Manufacturer Reference

JDE

Defect

A plastic component inside the exhaust line could under certain conditions damage the Diesel particle filter.

Remedy

Check and if necessary replace the particle filter.

---

Recalls Number (Vehicles Effected)

R/2017/340 (416)

Manufacturer Reference

HYB

Defect

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Remedy

On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

---

Recalls Number (Vehicles Effected)

R/2017/140 (6768)

Manufacturer Reference

HPS

Defect

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Remedy

On affected vehicles check and where necessary replace the starter motor relay.

---

Recalls Number (Vehicles Effected)

R/2017/125 (13)

Manufacturer Reference

HLY

Defect

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Remedy

On affected vehicles replace the gearbox actuator

---

Recalls Number (Vehicles Effected)

R/2016/230 (600)

Manufacturer Reference

HJM

Defect

In the event of emergency braking or during an ESP regulation phase (e.g. avoiding manoeuvre) the hydraulic block may not prevent the locking of a wheel which could affect control of the vehicle.

Remedy

On affected vehicles replace the braking system hydraulic block

---

Recalls Number (Vehicles Effected)

R/2016/160 (86)

Manufacturer Reference

HJC

Defect

The fuel injectors supply rail could develop a leak over a period of time leading to a drop in fuel pressure which can affect the operation of the stop start system. In some extreme cases the engine might not restart and a spray of petrol under the bonnet may occur which is a fire risk.

Remedy

Recall the vehicles that are likely to be affected and check the fuel injector supply rail. Where necessary replace the fuel injector supply rail.

---

Recalls Number (Vehicles Effected)

R/2016/043 (25)

Manufacturer Reference

HGQ

Defect

An oil leak could develop at the turbocharger lubrication union retaining bolt due to a non-conformity of this part.

Remedy

On affected vehicles replace the turbocharger lubrication union bolt and its seals.

---

Recalls Number (Vehicles Effected)

R/2016/031 (119)

Manufacturer Reference

HGR

Defect

"The tightening torque of the right hand seat belt lower mountings may not be to the correctspecification and the seat belt could detach."

Remedy

On affected vehickles check and if necessary tighten to correct specification.

---

Recalls Number (Vehicles Effected)

R/2016/019 (2157)

Manufacturer Reference

HFM

Defect

"On the affected vehicles the non-return valve located inside the fuel tank may not conform tospecification. If the vehicle was to roll over there is a risk of a fuel leak."

Remedy

"On affected vehicles checking the condition of the valve and replace the tank ifnecessary."

---

Recalls Number (Vehicles Effected)

R/2014/186 (17837)

Manufacturer Reference

ZVZ

Defect

On affected vehciles the handbrake adjustment may not have been correctly set during manufacture. This may cause the handbrake to be ineffective unless applied to it's full extent.

Remedy

On affected vehicles check handbrake setting and adjust if necessary.

---

Recalls Number (Vehicles Effected)

R/2014/081 (14)

Manufacturer Reference

ZTS

Defect

Front subframes on affected vehicles may show signs of damage to the left hand mounting point caused during the manufacturing process. Over time this may affect durability and cause the mounting to fail. This can affect security of components attached to the subframe and may affect control of the vehicle.

Remedy

Prior to failure the driver should notice excessive noise from this area. As a safety measure affected vehicles should be checked and where necessary the subframe replaced.

---

Recalls Number (Vehicles Effected)

R/2014/051 (44)

Manufacturer Reference

ZQV

Defect

It is possible that the connection torque settings for certain steering components on the wheel/strut assembly may not be to specification. The issue will be highlighted to the driver by an increase in the play in the steering but in extreme circumstances could lead to a loss of directional control.

Remedy

Recall all affected vehicles check and if required retorque the steering components.

---

Recalls Number (Vehicles Effected)

R/2014/046 (5502)

Manufacturer Reference

ZQN

Defect

The front suspension wishbone mounting bolts might not have been manufactured to the correct specification potentially causing a risk of these parts breaking. Broken mounting bolts can be noticed by the driver through noises and poor directional control.

Remedy

Recall the vehicles that are likely to be affected to replace the front suspension wishbone mounting bolts.

---

Recalls Number (Vehicles Effected)

R/2014/026 (148)

Manufacturer Reference

ZPZ

Defect

It has been established that the high pressure fuel rail pipes on the engine have not been torqued to the correct specification. This can result in poor sealing of the rail which can cause as fuel leak onto the engine. If the vaporised fuel comes into contact with a hot engine component there can be a risk of an engine bay fire.

Remedy

Recall all the affected vehicles and retorque the high pressure fuel rail pipes.