PEUGEOT EXPERT 4 UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2022/241 (57)

Manufacturer Reference

KZY

Defect

On the affected vehicles equipped with a manual handbrake the efficiency of the handbrake and service brake may be compromised.?

Remedy

Check the rear brake caliper references and replace as necessary.?

---

Recalls Number (Vehicles Effected)

R/2022/127 (708)

Manufacturer Reference

KVC

Defect

Affected vehicles may have been equipped with headrests on the front modular seat which do not conform to the design specification.

Remedy

Check the conformity of the front headrests (presence of the catch); in cases of non-conformity the front headrests will be replaced.

---

Recalls Number (Vehicles Effected)

R/2022/029 (51)

Manufacturer Reference

KLH

Defect

The rear window electrical harness could become displaced from its original position and present a potential thermal issue.

Remedy

Check the routing of harness and replace the electrical harness if necessary. Add a fastening clip to ensure that the electrical harness will be maintained in its normal position.

---

Recalls Number (Vehicles Effected)

R/2021/262 (2)

Manufacturer Reference

KNG

Defect

The rear spring centraliser might be welded incorrectly.

Remedy

Add 3 weld spots to the rear spring centralisers

---

Recalls Number (Vehicles Effected)

R/2021/004 (11)

Manufacturer Reference

KFU

Defect

A single wheel bolt on both left-hand wheels may not be tightened to the correct tightening torque.

Remedy

Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

---

Recalls Number (Vehicles Effected)

R/2021/003 (4)

Manufacturer Reference

KFV

Defect

A single wheel bolt on both right-hand wheels may not be tightened to the correct tightening torque.

Remedy

Check and if necessary replace wheel bolts and any other associated parts if consequential damage has occurred.

---

Recalls Number (Vehicles Effected)

R/2020/309 (11)

Manufacturer Reference

KEJ

Defect

A rear seat longitudinal adjustment lever may not lock properly.

Remedy

Check affected seat frames and replacing them if necessary.

---

Recalls Number (Vehicles Effected)

R/2019/258 (16828)

Manufacturer Reference

JLQ

Defect

There is a risk of inadvertent release to the front outer passenger seat belt.

Remedy

Modifying the central seat buckle with foam and heat-shrinkable protective tubing

---

Recalls Number (Vehicles Effected)

R/2019/146 (10936)

Manufacturer Reference

JFD

Defect

Possible slackening of the front wishbone ball joint.

Remedy

Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced

---

Recalls Number (Vehicles Effected)

R/2019/146 (10936)

Manufacturer Reference

JFD

Defect

Possible slackening of the front wishbone ball joint.

Remedy

Increasing the tightening torque of the ball joint and adding thread lock if the ball joint threads are found to be rusty or loose the ball joint will be replaced

---

Recalls Number (Vehicles Effected)

R/2019/030 (326)

Manufacturer Reference

JGJ

Defect

The rear suspension wishbone mountings bolts may not be correct to specification.

Remedy

Replacement of the rear suspension wishbone bolts.

---

Recalls Number (Vehicles Effected)

R/2019/026 (2942)

Manufacturer Reference

JHK

Defect

Excessive loading of the front suspension could result in the loosening of the front wishbone lower ball joints.

Remedy

"Increasing the tightening torque of the ball joint and adding thread lock to the ball jointthreads if the ball joint threads are found to be rusty the ball joint will be replaced."

---

Recalls Number (Vehicles Effected)

R/2019/028 (2643)

Manufacturer Reference

JCP

Defect

The air conditioning compressor pulley could break and damage other components.

Remedy

Replace the air conditioning compressor pulley and if necessary the protective cover.

---

Recalls Number (Vehicles Effected)

R/2019/034 (14)

Manufacturer Reference

JGG

Defect

The steering rack assembly may not be correct to specification.

Remedy

Replace the steering rack assembly and the fixings.

---

Recalls Number (Vehicles Effected)

R/2019/032 (21)

Manufacturer Reference

JFF

Defect

The fixing bolt of the front Suspension wishbone may not be correct to specification.

Remedy

Replace the fixing bolts and nuts of the front suspension wishbones.

---

Recalls Number (Vehicles Effected)

R/2018/196 (96)

Manufacturer Reference

HYJ

Defect

The tow ball bracket could not withstand mechanical constraints when subjected to the highest stress levels which can occur during the vehicle's lifetime.

Remedy

The manufacturer?s remedy involves the replacement of the tow ball support bracket with a redesigned version.

---

Recalls Number (Vehicles Effected)

R/2018/192 (841)

Manufacturer Reference

JBQ

Defect

"The cooling system strategy and the maximum temperature alert could cause the engineto overheat this may cause an oil leak from the sump drain cap. Due to the incorrect operation of the warning system there is no driver alert."

Remedy

The remedy involves downloading new engine management software.

---

Recalls Number (Vehicles Effected)

R/2018/185 (47)

Manufacturer Reference

JCW

Defect

"On the affected vehicles the tightening of a sealing plug on the engine oil gallery maynot be correct to specification.This could lead over time to an oil leak which in rare cases could result in oil leaking on to the road. "

Remedy

The remedy consists of tightening the engine oil gallery sealing plug to the correct torque

---

Recalls Number (Vehicles Effected)

R/2018/003 (314)

Manufacturer Reference

HYL

Defect

An engine component may not be to specification which could result in loss of engine performance. This may lead to the engine stalling and potentially causing an engine failure. In very unlikely circumstances the vehicle speed may increase without warning but will stop on its own after a few seconds.

Remedy

On affected vehicles carry out a functional diagnostic check of the engine. If necessary replace the engine.

---

Recalls Number (Vehicles Effected)

R/2017/265 (16)

Manufacturer Reference

HVM

Defect

The positioning of the starter supply terminal may be incorrect. This may allow it to foul other components and cause a short circuit.

Remedy

On affected vehicles check the positioning of the terminal and correct it if necessary.

---

Recalls Number (Vehicles Effected)

R/2017/222 (84)

Manufacturer Reference

HTU

Defect

Possible non-compliance of an internal component of the starter control relay could cause damage by overheating. This could cause unintended operation of the starter motor and in extreme instances; there is a risk of fire.

Remedy

On affected vehicles check and if necessary replace the relay

---

Recalls Number (Vehicles Effected)

R/2017/184 (1326)

Manufacturer Reference

HSQ

Defect

The tightness of one of the air conditioning compressor support mountings may not be correct to specification. This will result in an abnormal noise and possibility of the compressor becoming insecure

Remedy

On affected vehicles check the tightness of the support; where necessary the support will be replaced.

---

Recalls Number (Vehicles Effected)

R/2017/140 (6768)

Manufacturer Reference

HPS

Defect

A possible nonconformity of an internal component of the starter motor relay could affect the control of the starter motor. This could adversely affect the starting operation and damage the starter motor due to overheating and in extreme cases there is a risk of fire.

Remedy

On affected vehicles check and where necessary replace the starter motor relay.

---

Recalls Number (Vehicles Effected)

R/2017/125 (13)

Manufacturer Reference

HLY

Defect

A component in the gearbox actuator may not be to the correct specification which may affect gear selection.

Remedy

On affected vehicles replace the gearbox actuator

---

Recalls Number (Vehicles Effected)

R/2017/064 (42)

Manufacturer Reference

HPH

Defect

It has been identified that the wheel bolts may not have been tightened to the correct specification. The driver may experience a vibration through the steering wheel. However it not rectified there is a risk that the wheels may become damaged over time or the wheel could in extreme cases could detach from the vehicle whilst driving. This could cause loss of control of the vehicle.

Remedy

Recall all affected vehicles to check the tightness of the road wheel bolts and rectify as necessary. In certain cases the replacement of the bolt(s) and wheel(s) may be necessary.

---

Recalls Number (Vehicles Effected)

R/2017/062 (58)

Manufacturer Reference

HLZ

Defect

It has been identified that the fuel filler neck assembly may not have been correctly installed at production. This can therefore result in a fuel leak from around the fuel filler area if the fuel tank is filled to maxumum or can fuel leak if the vehicle rolls over..

Remedy

Recall all affected vehicles to check fuel filler neck and rework/rectify if required.