RENAULT TRAFIC UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2024/006 (22)

Manufacturer Reference

0E8N

Defect

On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.

Remedy

Replace the airbag collision sensors.?

---

Recalls Number (Vehicles Effected)

R/2024/004 (1135)

Manufacturer Reference

0E8D

Defect

On affected vehicles the driver and passenger airbag and seatbelt pre-tensioners may not deploy.?

Remedy

Replace the airbag collision sensors.?

---

Recalls Number (Vehicles Effected)

R/2020/267 (45)

Manufacturer Reference

0DCJ

Defect

Risk of the gas generator cracking on the passenger airbag causing a leak meaning the airbag may not display fully in an event of an accident.

Remedy

Replace the passenger airbag as a preventive measure.

---

Recalls Number (Vehicles Effected)

R/2020/021 (450)

Manufacturer Reference

0D4U

Defect

There is a risk the handbrake may not hold the vehicle in place due to a non-conformity of the rear brake calipers

Remedy

Check the manufacturing markings on the Left and Right Rear Brake Calipers and if necessary replace them

---

Recalls Number (Vehicles Effected)

R/2020/002 (3)

Manufacturer Reference

0D3Z

Defect

Possible Fuel leak from tank

Remedy

Check the date of manufacture of the fuel tank and change it if necessary

---

Recalls Number (Vehicles Effected)

R/2019/185 (7)

Manufacturer Reference

OD3H

Defect

Rear bench seatbelt buckle bolts may not be correctly tightened.

Remedy

Check the buckle bolts are at the correct torque.

---

Recalls Number (Vehicles Effected)

R/2019/141 (2475)

Manufacturer Reference

0D21

Defect

Possible failure of the parking brake due to a non-conformity (crimping) at cable connection ends.

Remedy

Replace the secondary cables and connectors.

---

Recalls Number (Vehicles Effected)

R/2019/017 (5)

Manufacturer Reference

0D05

Defect

Rear seatbelt may become stuck due to incorrect fitting of the reel housing.

Remedy

Check the fitting of the seat belt inertia reel housings and adjust as required.

---

Recalls Number (Vehicles Effected)

R/2018/145 (152)

Manufacturer Reference

0CUE

Defect

Lighting fault after LED fitment

Remedy

Re-programme and re-configure the Energy Manangement Module

---

Recalls Number (Vehicles Effected)

R/2017/013 (32)

Manufacturer Reference

OC96

Defect

It has been identified that the incorrect tyre pressure label has been fitted. In addition if orderer the spare wheel may also be incorrect. It is therefore possible that the stability of the vehicle could be affected.

Remedy

Recall all affected vehicles to replace both the tyre pressure label and the spare wheel with new quality assured items.

---

Recalls Number (Vehicles Effected)

R/2016/279 (18486)

Manufacturer Reference

0CF1

Defect

The rear axle bolts may not have been correctly tightened which may generate a noise from inside the wheel arch or cause friction on the Tyre. If the concern is not addressed it is possible for the axle to become uncoupled from the body of the vehicle.

Remedy

Recall the vehicles that are likely to be affected to ensure the bolts are at the correct torque. Where axle bolts are found to be missing the axle must be replaced.

---

Recalls Number (Vehicles Effected)

R/2016/203 (847)

Manufacturer Reference

OC7H

Defect

The customer may experience vibrations or noise from the steering wheel due to cracks starting in the steering wheel hub. If not rectified in the worst case over time the steering wheel could break and affect the directional control of the vehicle.

Remedy

Recall the vehicles that are likely to be affected and check of the manufacturing date of the steering wheel hub. The steering wheel hub will be replaced it if the date is inside the identified period.

---

Recalls Number (Vehicles Effected)

R/2016/203 (847)

Manufacturer Reference

OC7H

Defect

The customer may experience vibrations or noise from the steering wheel due to cracks starting in the steering wheel hub. If not rectified in the worst case over time the steering wheel could break and affect the directional control of the vehicle.

Remedy

Recall the vehicles that are likely to be affected and check of the manufacturing date of the steering wheel hub. The steering wheel hub will be replaced it if the date is inside the identified period.

---

Recalls Number (Vehicles Effected)

R/2016/203 (847)

Manufacturer Reference

OC7H

Defect

The customer may experience vibrations or noise from the steering wheel due to cracks starting in the steering wheel hub. If not rectified in the worst case over time the steering wheel could break and affect the directional control of the vehicle.

Remedy

Recall the vehicles that are likely to be affected and check of the manufacturing date of the steering wheel hub. The steering wheel hub will be replaced it if the date is inside the identified period.

---

Recalls Number (Vehicles Effected)

R/2016/203 (847)

Manufacturer Reference

OC7H

Defect

The customer may experience vibrations or noise from the steering wheel due to cracks starting in the steering wheel hub. If not rectified in the worst case over time the steering wheel could break and affect the directional control of the vehicle.

Remedy

Recall the vehicles that are likely to be affected and check of the manufacturing date of the steering wheel hub. The steering wheel hub will be replaced it if the date is inside the identified period.

---

Recalls Number (Vehicles Effected)

R/2016/243 (4310)

Manufacturer Reference

0CAZ

Defect

It has been identified that during production the EGR pipe has been manufactured from incorrect thickness material. Due to the affect of stresses i.e. heat vibration etc on the pipe it can lead to cracking. If there is significant crack there is a possibility exhaust gases could leak. This could cause surrounding parts to deteriorate. If this happens the vehicle will emit black smoke from the exhaust there will be a loss of power and a warning light will illuminate on the instrument panel.

Remedy

Recall all affected vehicles and replace to the EGR pipe.

---

Recalls Number (Vehicles Effected)

R/2016/103 (348)

Manufacturer Reference

OC91

Defect

There is a risk the passenger airbag mounting bolts are incorrectly installed which can lead to the airbag not correctly deploying. If a heavy front end collision occurs the passenger could sustain additional injury.

Remedy

Recall the vehicles that are likely to be affected and check for the presence of the bolts and if missing fit new one(s).

---

Recalls Number (Vehicles Effected)

R/2016/017 (12832)

Manufacturer Reference

OC59

Defect

On a small number of vehicles one or more of the bonnet lock bolts may not be correctly tightened. In exceptional cases this may cause the bonnet to open whilst driving.

Remedy

On affected vehicles check and where necessary tighten bonnet lock bolts.

---

Recalls Number (Vehicles Effected)

R/2016/001 (527)

Manufacturer Reference

0C68

Defect

On affected vehicles the drive to brake vacuum pump may fail. This may cause a loss of brake servo assistance and a hard brake pedal. It may also cause a reduction in engine power.

Remedy

Check the manufacture date of the vacuum pump and where necessary replace the pump.

---

Recalls Number (Vehicles Effected)

R/2015/020 (622)

Manufacturer Reference

OBYU (a)

Defect

It is possible for the servo mounting bolts to loosen. If the noises are ignored over time it is possible for the brakes to be compromised.

Remedy

Recall the vehicles that are likely to be affected and replace the brake pedal/servo mounting nuts.

---

Recalls Number (Vehicles Effected)

R/2015/021 (418)

Manufacturer Reference

OBYU (b)

Defect

The parking brake cable may not have been assembled correctly which can result in either the inability to apply the parking brake or the inability to release the parking brake.

Remedy

Recall the vehicles that are likely to be affected and replace the parking brake cable.

---

Recalls Number (Vehicles Effected)

R/2015/045 (1425)

Manufacturer Reference

OBZY

Defect

The integrity of the front seat bench frame for the passengers may be compromised because of non-compliance during the manufacturing processes. Customer may hear noises coming from underneath the bench. They may also notice some cracking on the seat frame angles. If the seat fails during a collision the passengers have an elevated risk of injury.

Remedy

Recall the vehicles that are likely to be affected and inspect the seat frame. Replace the seat where necessary.

---

Recalls Number (Vehicles Effected)

R/2015/019 (936)

Manufacturer Reference

OBZC

Defect

The front axle wishbone mounting nuts may not have been tightened to the correct specification. The driver may experience noise from the front axle or find the steering becomes vague.

Remedy

Recall the vehicles that are likely to be affected to check the torque tightening of the axle wishbone nuts or replace if required.

---

Recalls Number (Vehicles Effected)

R/2014/052 (648)

Manufacturer Reference

0BU7

Defect

There is a possibility that the rear lights may cease to function due to the wiring insulation being abraded on a roof lining angle bracket. If the rear lights cease to function there is an increased risk of collision as other road users are not warned of vehicle; position directional intent or braking intent. Warnings for the driver can be gained from acrid smell indicator tell-tale flashing faster than normal and other electrical items in the rear not working.

Remedy

Recall the vehicles that are likely to be affected to check and where necessary replace the wiring. In all cases protection for the wiring will be fitted.

---

Recalls Number (Vehicles Effected)

R/2010/218 (1180)

Manufacturer Reference

OBAW

Defect

Risk that the primary handbrake cable end - piece crimping may not conform so the handbrake cable may become detached.

Remedy

Check crimping at cable end. Replace cable if not within tolerance.

---

Recalls Number (Vehicles Effected)

R/2010/059 (22)

Manufacturer Reference

OB7X

Defect

The suspension turret panel may fail due to inadequate welding being applied at the factory.

Remedy

Recall the vehicles that are likely to be affected to apply further weld to the nearside inner wing suspension turret.

---

Recalls Number (Vehicles Effected)

R/2009/132 (48)

Manufacturer Reference

Defect

Tyres of an incorrect size have been fitted which could result in tyre failure.

Remedy

Recall the affected vehicles to replace the five tyres the spare wheel carrier mountings and reconfigure the ABS computer.

---

Recalls Number (Vehicles Effected)

R/2009/117 (1429)

Manufacturer Reference

OB3W

Defect

The rear outboard seat belt stalks may become less effective as it is possible for the mounting bolt to unscrew.

Remedy

Recall the vehicles that are likely to be affected to apply thread locking compound to the appropriate seat belt stalk fixings.

---

Recalls Number (Vehicles Effected)

R/2008/166 (26355)

Manufacturer Reference

Defect

It has been identified that the possibility exists that the handbrake cable intermediate connector may break. Should this occur the handbrake function would be lost.

Remedy

Recalled vehicles will have the handbrake intermediate connector replaced.

---

Recalls Number (Vehicles Effected)

R/2008/166 (26355)

Manufacturer Reference

Defect

It has been identified that the possibility exists that the handbrake cable intermediate connector may break. Should this occur the handbrake function would be lost.

Remedy

Recalled vehicles will have the handbrake intermediate connector replaced.

---

Recalls Number (Vehicles Effected)

R/2008/042 (84)

Manufacturer Reference

OAZP

Defect

It has been identified that there has been a left to right inversion of the side impact sensor wiring which in certain cases may result in inadequate deployment of the airbags in the event of a side impact.

Remedy

Recalled vehicles will have the airbag ECU replaced.

---

Recalls Number (Vehicles Effected)

R/2007/123 (2)

Manufacturer Reference

oavG

Defect

It has been identified that the dashboard wiring hs been mounted incorrectly. This may result in the vehicle failing to start the reversing lights failing to operate the risk of a short circuit of the FRH headlights damage to the wiring and high temperatures.

Remedy

Recalled vehicles will have the dashboard wiring refitted and replaced as necessary.

---

Recalls Number (Vehicles Effected)

R/2007/123 (2)

Manufacturer Reference

oavG

Defect

It has been identified that the dashboard wiring hs been mounted incorrectly. This may result in the vehicle failing to start the reversing lights failing to operate the risk of a short circuit of the FRH headlights damage to the wiring and high temperatures.

Remedy

Recalled vehicles will have the dashboard wiring refitted and replaced as necessary.

---

Recalls Number (Vehicles Effected)

R/2007/111 (6)

Manufacturer Reference

OAWA

Defect

It has been identified that the front passenger seatbelt pretensioner has not been configured correctly. In the event of an impact the pretensioner will not trigger. The front seat passenger will however still be retained by the seatbelt but without the pretensioner function.

Remedy

Recalled vehicles will have the front passenger seatbelt configured.

---

Recalls Number (Vehicles Effected)

R/2007/040 (12)

Manufacturer Reference

OAUB

Defect

It has been identified that a potential loss of engine cooling fan function (cooling fan number 2) will cause the engine to seize without warning due to overheating. The STOP warning light may or may not illuminate.

Remedy

Recalled vehicles will have front-end wiring replaced.

---

Recalls Number (Vehicles Effected)

R/2002/149 (816)

Manufacturer Reference

0A6W

Defect

Risk of loss of service brake due to securing clips missing from the brake pedal to servo cross shaft linkage.

Remedy

Examine brake pedal cross shaft installation and replace any missing clips.