RENAULT TWINGO UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2017/313 (187)

Manufacturer Reference

0CMU

Defect

Depending on driving style and road profile there is a risk of degradation of the front left sub axle carrier.

Remedy

Recall the vehicles that are likely to be affected and checking the front left stub axle carrier casting number Where necessary replace the stub axle carrier.

---

Recalls Number (Vehicles Effected)

R/2017/136 (4056)

Manufacturer Reference

OHCD/OHCE

Defect

Operations 1) or 2) or operations 1) and 2) could be required: 1) The upper part of the bonnet (the bonnet skin) may detach from the rest of the bonnet due to poor adhesive being applied at the factory and deterioration over time. There would be no obvious signs to the customer. 2) The outer part (skin) of the rear spoiler may detach from the vehicle and /or the pins on the glass tailgate. There would be no warning to the customer.

Remedy

Recall the vehicles that are likely to be affected and add re-enforcement to the spoiler and/or bonnet or both as required.

---

Recalls Number (Vehicles Effected)

R/2017/135 (5623)

Manufacturer Reference

OCHD

Defect

The outer part (skin) of the rear spoiler may detach from the vehicle and /or the pins on the glass tailgate. There would be no warning to the customer. However the possibility of detachment is increased due to the use of car washes.

Remedy

Recall the vehicles that are likely to be affected and fit additional re-enforcement to the spoiler and bonnet.

---

Recalls Number (Vehicles Effected)

R/2015/132 (1022)

Manufacturer Reference

OC1V

Defect

The front shock absorber (strut) mounting for the anti-roll bar rod may not be welded correctly. If the welding should fail there will initially be noise leading to the possibility for adversely affected vehicle handling because the anti-roll bar will no longer be connected the risk of contact and damage to the wheel rim tyre brake hose and ABS cable.

Remedy

Recall the vehicles that are likely to be affected and check the shocker absorber (strut) build dates. The shock absorber that are in the affected range will be replaced.

---

Recalls Number (Vehicles Effected)

R/2015/065 (393)

Manufacturer Reference

0BVZ

Defect

Due to an error in the manufacturing process the seat belt buckle may not retain the belt during a frontal impact.

Remedy

On affected vehicles check build date of seat belt assembly and replace if necessary.

---

Recalls Number (Vehicles Effected)

R/2015/075 (1115)

Manufacturer Reference

0BZZ

Defect

Due to an error in the engine ECU software it is possible that the vehicle will suffer an unintended acceleration or not able to decelerate. The driver should still be able to control the vehicle by applying the brakes and manipulating the clutch and gears.

Remedy

Recall all affected vehicles to reprogram the engine ECU with new software.

---

Recalls Number (Vehicles Effected)

R/2014/179 (393)

Manufacturer Reference

BL14091

Defect

Seat belt tongue may not hold in the buckle sufficiently. In a collision the tongue may separate from the buckle putting the occupant of the affected belt at risk.

Remedy

Recall the vehicles that are likely to be affected and replace the seatbelt buckle on the passenger side (x 75) and driver side (x6).

---

Recalls Number (Vehicles Effected)

R/2009/093 (663)

Manufacturer Reference

OB5X

Defect

It has been identified that the driver's seat may suffer permanent or intermittent non-locking on it's runners. This can occur when the vehicle is stationary or when being driven..

Remedy

Recalled vehicles will have a latch fitted to the seat's locking device.

---

Recalls Number (Vehicles Effected)

R/2002/156 (1861)

Manufacturer Reference

0A8F

Defect

There is a risk of a loss of brake servo assistance due to the incorrect positioning of the air pressure sensor in the inlet manifold.

Remedy

Check the position of the air pressure sensor and correct where necessary.

---

Recalls Number (Vehicles Effected)

R/2001/161 (1445)

Manufacturer Reference

0A53

Defect

Customers may find that they are unable to secure the front and side doors of their vehicles due to wear of the locking bolt due to omission of heat treatment.

Remedy

Rectified by replacing both the front and side door locks.

---

Recalls Number (Vehicles Effected)

R/2000/072 (17)

Manufacturer Reference

Defect

The computer which controls the deployment of the Airbags may be incorrectly programmed. The Airbags may inadvertently deploy.

Remedy

Recall affected vehicles and change the computer which controls the deployment of the Airbags.