SEAT FORMENTOR UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2023/199 (379)

Manufacturer Reference

42M7

Defect

Certain vehicles may be fitted with a wheel support containing cavities in the material.

Remedy

Inspect the rear left wheel support and if necessary replace the?knuckle.

---

Recalls Number (Vehicles Effected)

R/2022/185 (10145)

Manufacturer Reference

69DQ

Defect

There is a possibility that the wiring harness of the airbag control unit was caught by the clutch pedal during installation.

Remedy

The correct position of the airbag control unit wiring harness must be checked and if required secured in the correct position. Repair any existing damage as necessary.

---

Recalls Number (Vehicles Effected)

R/2022/185 (10145)

Manufacturer Reference

69DQ

Defect

There is a possibility that the wiring harness of the airbag control unit was caught by the clutch pedal during installation.

Remedy

The correct position of the airbag control unit wiring harness must be checked and if required secured in the correct position. Repair any existing damage as necessary.

---

Recalls Number (Vehicles Effected)

R/2022/088 (2347)

Manufacturer Reference

93N9

Defect

In some vehicles the fuse in the high-voltage system has been produced in part with an insufficient amount of extinguishing sand.

Remedy

An insulating mat must be placed above the switching unit for the high-voltage battery in all of the affected vehicles.

---

Recalls Number (Vehicles Effected)

R/2022/076 (2309)

Manufacturer Reference

10H7

Defect

In some vehicles within the range of specified VINs it is possible that they have engine design covers installed that could detach from their fixing depending on use (very sporty driving or poor road conditions) and the operating time.

Remedy

The engine design cover must be removed on all affected vehicles.