SUZUKI BALENO UK Recall Check

---

Recalls Number (Vehicles Effected)

R/2022/267 (71508)

Manufacturer Reference

R22/01

Defect

Some vehicles have an inappropriate design and material on the check valve of brake vacuum pump.

Remedy

Replace the vacuum pump check valve.

---

Recalls Number (Vehicles Effected)

R/2018/078 (2247)

Manufacturer Reference

R18/03

Defect

Due to a lack of strength in the Integrated Starter Generator (ISG) Belt may break during usage. If this happens the water pump will become inoperative and the charging light will illuminate. The coolant temperature warning light will also light due to an increase in coolant temperature. In the worst case scenario the engine may stall and not restart.

Remedy

On affected vehicles replace the ISG belt.

---

Recalls Number (Vehicles Effected)

R/2018/071 (6313)

Manufacturer Reference

R18/02

Defect

Due to incorrect software in the Engine Control Module (ECM) the ENG A-STOP (Engine Auto Stop Start System) OFF light may blink & the ENG A-STOP system may become inoperative. If the car is driven continuously in this condition the lead-acid battery will not be charged. In the worst case there is a possibility that the lights will dim and the engine may stall and not restart due to low battery voltage.

Remedy

Recall the vehicles that are likely to be affected and reprogramme the ECM with corrected software.

---

Recalls Number (Vehicles Effected)

R/2000/014 (3115)

Manufacturer Reference

Defect

Due to flexing of the suspension strut mounting turret it is possible that the suspension strut mounting studs may shear. Should all 3 mounting studs shear the suspension strut may detach from the mounting turret.

Remedy

Recall all affected vehicles for the fitment of upper and lower reinforcement plates to the suspension turret and the fitment of new strut mountings.

---

Recalls Number (Vehicles Effected)

R/1999/045 (137)

Manufacturer Reference

Defect

During manufacture of the airbag propellant module the propellant crystals were exposed to a high humidity environment which increased the moisture content to 1.2% with the result that during activation the airbag might deploy with a greater force than originally designed.

Remedy

Recall affected vehicles and replace the drivers airbag with a quality assured unit.