Car Recall Check

The condensation drainage ducts on the air-conditioning housing were not punched through, this prevents condensation from flowing through the condensation duct as intended, thus allowing it to enter the vehicle’s interior. Condensation could enter the airbag control unit and lead to a malfunction, such as its accidental triggering. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The welded surface between the fuel tank and the inlet pipe may become detached, causing fuel to leak when the tank is full or refilled. In the presence of an ignition source, fuel leakage can increase the risk of fire. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

During the process of assembling the rear stub axle housing at the supplier’s, it is possible that the attachment screw of the rear right or rear left stub axle housing was not tightened to the required torque. Friction noise may occur in the area of the rear axle during operation, which may be followed by loss of control of the vehicle when the stub axle housing comes loose, increasing the risk of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

In some cases the end mount of the seat belt on the driver’s seat may not have been fitted in accordance with the specifications, for this case the end mount of the seat belt would be held in position only by the external seat trim. In the event of adverse conditions or an accident this could seriously impair the restraining function of the seat belt and increase the risk of injury to the driver. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

In some cases the end mount of the seat belt on the driver’s seat may not have been fitted in accordance with the specifications, for this case the end mount of the seat belt would be held in position only by the external seat trim. In the event of adverse conditions or an accident this could seriously impair the restraining function of the seat belt and increase the risk of injury to the driver. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Because defects in the adaptive LED lights have been identified, they need to be inspected and, if necessary, reprogram the ECU for adaptive LED lights. In the absence of these LED lights, the risk of accidents increases. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The screws which were used to assemble seatbelts and also on the rear seats of the vehicles concerned may not have been manufactured in accordance with specifications. In some cases, the screws in question cannot withstand extreme loads, which could increase the risk of injury in the event of an accident. The product does not comply with the requirements laid down in the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.