Warning!
Message!
Car Recall Check: Recalls
Car Recall Check
Use the drop down menu's below to search by make or model to find the latest recalls.
You can also check other types of vehicles such as tractors, scooters, camper vans etc; car parts such as battery and tyres.
Common Vehicle Manufacturer Recalls
Find manufacturer recalls using our Car Recall Check, or simply browse the links below.
Vehicle Type:
Manufacturer:
Model
03/04/2009 - Alfa Romeo
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the brake pedal can be stiff when pressed for the first few times after starting the cold engine at altitudes higher than 1000 metres above sea level. This is due to insufficient brake booster assistance caused by low vacuum at low engine speed at high altitude immediately after cranking and could cause a risk of a road accident.
Model Numbers:
models 159, Brera and Spider all types (Recall Campaign 5338)
Production Dates:
Recall Code:
For more information and see the full recall View
03/04/2009 - Alfa Romeo
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the brake pedal can be stiff when pressed for the first few times after starting the cold engine at altitudes higher than 1000 metres above sea level. This is due to insufficient brake booster assistance caused by low vacuum at low engine speed at high altitude immediately after cranking and could cause a risk of a road accident.
Model Numbers:
models 159, Brera and Spider all types (Recall Campaign 5338)
Production Dates:
Recall Code:
For more information and see the full recall View
03/04/2009 - Alfa Romeo
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the brake pedal can be stiff when pressed for the first few times after starting the cold engine at altitudes higher than 1000 metres above sea level. This is due to insufficient brake booster assistance caused by low vacuum at low engine speed at high altitude immediately after cranking and could cause a risk of a road accident.
Model Numbers:
models 159, Brera and Spider all types (Recall Campaign 5338)
Production Dates:
Recall Code:
For more information and see the full recall View
03/04/2009 - Alfa Romeo
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the brake pedal can be stiff when pressed for the first few times after starting the cold engine at altitudes higher than 1000 metres above sea level. This is due to insufficient brake booster assistance caused by low vacuum at low engine speed at high altitude immediately after cranking and could cause a risk of a road accident.
Model Numbers:
models 159, Brera and Spider all types (Recall Campaign 5338)
Production Dates:
Recall Code:
For more information and see the full recall View
03/04/2009 - Alfa Romeo
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the brake pedal can be stiff when pressed for the first few times after starting the cold engine at altitudes higher than 1000 metres above sea level. This is due to insufficient brake booster assistance caused by low vacuum at low engine speed at high altitude immediately after cranking and could cause a risk of a road accident.
Model Numbers:
models 159, Brera and Spider all types (Recall Campaign 5338)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - MITSUBISHI
No Image available
Check This Car for the following recall:
The products poses a risk of injuries because the brake lamp may not light up due to insufficient conduction caused by intrusion of insulating material inside the stop lamp switch, causing the risk of a road accident.
Model Numbers:
Outlander (CW0W), Grandis (NA0W)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - FORD
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because some vehicles may have rear brake back plate securing bolts that are not tightened to the correct specification. A loose back plate bolt could drop into the brake drum; causing damage to the brake linings with the risk of the rear wheel locking.
Model Numbers:
Model Ka
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - HONDA
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the locating bolt was not fitted initially and was then missed as the installed seat belt obscured the locating bolt hole from the operator's view. If the locating bolt is missing, the seatbelt's Emergency Locking Retractor (ELR) can move during usage potentially loosening the ELR mounting bolt. If this should happen, the ELR can move outside its intended angle limit preventing correct operation of the locking function. If the seat belt retractor bolt is missing, correct operation of the seat belt locking mechanism cannot be guaranteed. This may reduce protection in case of an impact, thus increasing the risk of injury.
Model Numbers:
Passenger car, model Jazz (model codes: GG2 and GG3)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - Fiat
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because, due to a production process problem, the rear wheel shoe-holder fastening screws may come loose and, in extreme cases, cause wheel locking and consequently the risk of a road accident.
Model Numbers:
model 500 (all types) excluding 1.4 16V (Recall Campaign 5371)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - HONDA
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because the locating bolt was not fitted initially and was then missed as the installed seat belt obscured the locating bolt hole from the operator's view. If the locating bolt is missing, the seatbelt's Emergency Locking Retractor (ELR) can move during usage potentially loosening the ELR mounting bolt. If this should happen, the ELR can move outside its intended angle limit preventing correct operation of the locking function. If the seat belt retractor bolt is missing, correct operation of the seat belt locking mechanism cannot be guaranteed. This may reduce protection in case of an impact, thus increasing the risk of injury.
Model Numbers:
Passenger car, model Jazz (model codes: GG2 and GG3)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - MITSUBISHI
No Image available
Check This Car for the following recall:
The products poses a risk of injuries because the brake lamp may not light up due to insufficient conduction caused by intrusion of insulating material inside the stop lamp switch, causing the risk of a road accident.
Model Numbers:
Outlander (CW0W), Grandis (NA0W)
Production Dates:
Recall Code:
For more information and see the full recall View
27/03/2009 - Fiat
No Image available
Check This Car for the following recall:
The product poses a risk of injuries because, due to a production process problem, the rear wheel shoe-holder fastening screws may come loose and, in extreme cases, cause wheel locking and consequently the risk of a road accident.
Model Numbers:
model 500 (all types) excluding 1.4 16V (Recall Campaign 5371)
Production Dates:
Recall Code:
For more information and see the full recall View