Car Recall Check

Due to improper installation, the 12V starter/generator wiring harness could come into contact with the drive shaft, causing abrasion over time. As a result, a short circuit may occur leading to an unexpected sudden loss of propulsion, increasing the risk of an accident. Moreover, strong electrical currents that may flow through the connection could cause an increase in temperature in the affected area, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

An internal coolant leak in the EPCU (Electric Power Control Unit) may lead to coolant entering the electrical systems. As a result, it could cause a sudden loss of power, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Two reinforcement pins in the windscreen frame can be incorrectly sealed or are missing, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Insufficient pressing of parts in the high pressure fuel pump can cause movement of the cylinder in the fuel pump through which the piston moves. This can create wear between the cylinder and the pump body, resulting in increased stress on valves and/or movement valve seat inside the pump body. This increased stress can cause a crack in the weld of the affected valves, which could lead to a fuel leak, increasing the risk of fire. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The front left side airbag is not properly fixed and the seat may cause the area covered by the airbag to move slightly. As a result, the protective effect of the airbag is reduced, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The front left side airbag is not properly fixed and the seat may cause the area covered by the airbag to move slightly. As a result, the protective effect of the airbag is reduced, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The front left side airbag is not properly fixed and the seat may cause the area covered by the airbag to move slightly. As a result, the protective effect of the airbag is reduced, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The front left side airbag is not properly fixed and the seat may cause the area covered by the airbag to move slightly. As a result, the protective effect of the airbag is reduced, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Conductive fibrous shavings from the slip ring assembly of the drive motors may cause a short circuit between the two slip rings, resulting in an overcurrent detected in the inverter. As a result, engine torque is cut to protect internal components of the controller, resulting in a loss of drive and potentially an "EV System Off" display on the dashboard, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The instrument unit is made with a single layer of tempered glass, which may break under side impact conditions, increasing the risk of injury in case of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The rear axle wiring can touch the rear axle housing and rub against it over time, damaging the electric parking brake cables. This can cause the parking brake to be applied unintentionally while driving, which can result in loss of vehicle control, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.