Car Recall Check

The thread on the housing of the towing eye has the wrong dimensions and the eye cannot be screwed the required 7 to 8 turns. When towed, the vehicle can get disconnected from the vehicle towing it, posing a risk to the following traffic. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The cabling of the front turn signals has been incorrectly assembled. When the front warning lights are activated, this results in reduced brightness of the headlamps and this may increase the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

Improper rings used for rocker panel protectors can cause them to come loose and fall on the road, posing a risk to traffic.Contact may occur between the vacuum hose and the surrounding parts. This may result in loss of the braking assistance, increasing the risk of an accident.The bonnet locking screws are insufficiently tightened. As a result, the bonnet could become detached while driving, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The lower front suspension ball joint holder may break and can detach from the from the ball joint, causing directional instability which increases the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

At high speeds, the air inlet between the bonnet and the radiator grill causes vibrations in the hood. This can result in stress fractures along the bonnet latch striker and its separation from the bonnet, causing the bonnet to open. This obstructs the drivers view, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

At high speeds, the air inlet between the bonnet and the radiator grill causes vibrations in the hood. This can result in stress fractures along the bonnet latch striker and its separation from the bonnet, causing the bonnet to open. This obstructs the drivers view, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

At high speeds, the air inlet between the bonnet and the radiator grill causes vibrations in the hood. This can result in stress fractures along the bonnet latch striker and its separation from the bonnet, causing the bonnet to open. This obstructs the drivers view, increasing the risk of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The thread on the housing of the towing eye has the wrong dimensions and the eye cannot be screwed the required 7 to 8 turns. When towed, the vehicle can get disconnected from the vehicle towing it, posing a risk to the following traffic. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

The positive 12 Volt cable can come in contact with the negative supply wire or the bodywork and cause a short circuit and fire. The product does not meet the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

The positive 12 Volt cable can come in contact with the negative supply wire or the bodywork and cause a short circuit and fire. The product does not meet the Regulation on the approval and market surveillance of motor vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles

A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.

A defect in the gas generator of the driver airbag can lead to uncontrolled inflation and the release of metal fragments when the airbag is activated. This defect may increase the risk of injuries in the event of an accident. The product does not comply with the Regulation on the approval and market surveillance of Motor Vehicles and their trailers, and of systems, components and separate technical units intended for such vehicles.